On Thu, Jun 23, 2016 at 04:47:12AM +0000, Valo, Kalle wrote: > Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> writes: > > > After upgrading from v4.6 to v4.7-rc3 I'm starting to see following > > warnings constantly being printed by ath driver: > > > > [ 6.761789] ath: phy0: ASPM enabled: 0x43 > > [ 6.761794] ath: EEPROM regdomain: 0x6a > > [ 6.761796] ath: EEPROM indicates we should expect a direct regpair map > > [ 6.761799] ath: Country alpha2 being used: 00 > > [ 6.761800] ath: Regpair used: 0x6a > > [ 6.773482] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > > [ 6.774048] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffc90000b00000, irq=19 > > [ 6.774054] ------------[ cut here ]------------ > > [ 6.774070] WARNING: CPU: 1 PID: 103 at drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x161/0x1b0 [ath9k_hw] > > Should be fixed by this: > > ath9k: fix GPIO mask for AR9462 and AR9565 > > https://git.kernel.org/cgit/linux/kernel/git/kvalo/wireless-drivers.git/commit/?id=e024111f6946f45cf1559a8c6fd48d2d0f696d07 > Indeed, that fixes it. Thanks :) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
