Since stations can now be added before association
(NL80211_FEATURE_FULL_AP_CLIENT_STATE support),
no supported rates are set when the station is added
to the fw, resulting in fw recovery.
Fix it by first configuring the AP basic rates as
the station configured rates (when the station is
first added to the driver), and after the station
was authorized re-configure it, now with the actual
supported rates.
Signed-off-by: Guy Mishol <guym@xxxxxx>
---
drivers/net/wireless/ti/wlcore/cmd.c | 7 +++++++
drivers/net/wireless/ti/wlcore/main.c | 5 +++++
2 files changed, 12 insertions(+)
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 3315356..5f360ce 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1566,6 +1566,13 @@ int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
cpu_to_le32(wl1271_tx_enabled_rates_get(wl, sta_rates,
wlvif->band));
+ if (!cmd->supported_rates) {
+ wl1271_debug(DEBUG_CMD,
+ "peer has no supported rates yet, configuring basic rates: 0x%x",
+ wlvif->basic_rate_set);
+ cmd->supported_rates = cpu_to_le32(wlvif->basic_rate_set);
+ }
+
wl1271_debug(DEBUG_CMD, "new peer rates=0x%x queues=0x%x",
cmd->supported_rates, sta->uapsd_queues);
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 10fd24c..a53033d 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5091,6 +5091,11 @@ static int wl12xx_update_sta_state(struct wl1271 *wl,
if (ret < 0)
return ret;
+ /* reconfigure rates */
+ ret = wl12xx_cmd_add_peer(wl, wlvif, sta, wl_sta->hlid);
+ if (ret < 0)
+ return ret;
+
ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true,
wl_sta->hlid);
if (ret)
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
