Xose Vazquez Perez wrote: > Craig McQueen wrote: > > > I have a D-Link DWA-140 USB Wi-Fi device which is rt2800 based (5392 > > chipset). I'm trying to use it on a BeagleBone Black based system with > > 3.14.x kernel built with Yocto. We're using ConnMan 1.30 at the moment. > > Try it with a _desktop x86_64 distribution_ , with a *recent kernel* as > Fedora: (WORK is gnome) https://alt.fedoraproject.org/pub/alt/live-respins/ Hmm, that is non-trivial but I may try it. For now, I'll also try a 4.4.6 kernel running on a BeagleBone Black (with a USB hub to work around another issue with the rt2800usb driver crashing as described in another e-mail). > > We've been finding some instabilities with it periodically > > disconnecting from some networks. So we tried upgrading the firmware > > file rt2870.bin from version 0.29 to 0.36. That seems to be more > > stable with the network. However, we're finding that it initially > > doesn't connect, until the Wi-Fi has been disabled and then re-enabled. ' > scan wifi' > > and 'iwlist scan' don't return anything until Wi-Fi has been disabled > > and then re-enabled. > > Don't use any wrapper(NM, ConnMan, wicd, ...), usually are buggy. You > should use raw commands "iw" and "wpa_supplicant". Hints: > https://wireless.wiki.kernel.org/en/users/documentation/iw and > wpa_supplicant always running with "-Dnl80211" Okay, I've stripped down the system so ConnMan, udev rules aren't running. On all systems, after plugging in the device, I have to issue: ip link set wlan0 up After this, I try to do a scan: iw dev wlan0 scan On kernel 4.4.6, with firmware 0.36, it works fine (lists APs it finds). On kernel 3.14.x, with firmware 0.29, it works fine. But on kernel 3.14.x, with firmware 0.36, it returns nothing. But then, if I do this: ip link set wlan0 down ip link set wlan0 up iw dev wlan0 scan Then it works fine. So, the question is, why does firmware 0.36 with kernel 3.14.x not work until I've made the interface go up, then down, and then up again? > > Have there been any Linux driver changes needed to support this 0.36 > > firmware? Does anyone have any pointers on where to look to understand > > this behaviour between 0.29 and 0.36 firmware? > > closed source, but old changelogs are available at: > http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/ > 2013-September/006391.html > > Related to latest firmware releases, ralink/mediatek guys say: > "According to the engineers comment, the firmware didn't change much > these years, just some bbp register update and led stuff." -- Craig McQueen ��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
