Hi Craig, On Tue, May 10, 2016 at 8:08 AM, Craig McQueen <craig.mcqueen@xxxxxxxxxxxxxx> wrote: > I previously wrote: >> I previously wrote: >> > I previously wrote: >> > > >> > > I have a D-Link DWA-140 USB Wi-Fi device which is rt2800 based (5392 >> > > chipset). I've been testing it on a BeagleBone Black running an >> > > Ubuntu >> > > 16.04 image (4.4.6 kernel), with a USB hub. >> > > >> > > When I unplug the Wi-Fi device from the USB hub, and it's connected >> > > to an access point, and then I unplug it, the OS appears to lock up. >> > > I get messages about a soft lockup on the serial console: >> > > >> > > [ 9736.136702] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! >> > > [kworker/u2:0:1129] [ 9764.136701] NMI watchdog: BUG: soft lockup - >> > > CPU#0 stuck for 22s! [kworker/u2:0:1129] [ 9792.136701] NMI watchdog: >> > > BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u2:0:1129] [ >> > > 9820.136699] NMI >> > > watchdog: BUG: soft lockup - CPU#0 stuck for 22s! >> > > [kworker/u2:0:1129] [ 9848.136696] NMI watchdog: BUG: soft lockup - >> CPU#0 stuck for 22s! >> > > [kworker/u2:0:1129] >> > > >> > > This will repeat indefinitely, until I unplug the hub, which >> > > resolves the soft lockup and then the system seems to function normally. >> > > >> > > I've attached a dmesg log of the soft lockup stack traces. They seem >> > > to indicate a lockup in workqueue rt2x00usb_work_rxdone() >> > > (specifically in >> > > usb_hcd_submit_urb() called from rt2x00usb_kick_rx_entry() called >> > > from rt2x00usb_clear_entry()). >> > > >> > > I originally found this bug on a 3.14.x kernel built with Yocto for >> > > a BeagleBone Black-based product. So it seems this is a bug that has >> > > been around for some time. >> > >> > I should also note that on the 3.14.x Yocto-built kernel on BeagleBone >> > Black, this bug does not occur if the rt2800 device is unplugged >> > directly from the BBB's USB port. It only occurs if unplugged from a hub. >> > >> > I have tested this on an i586 based eBox-3310A mini-PC running Debian >> > 8.4, which has a 3.16.0 kernel, with the same hub and same rt2800 >> > device. But I was not able to reproduce this issue. >> >> There is a patch for the AM335x musb driver that seems to fix this: >> >> http://marc.info/?l=linux-usb&m=146173995117456&w=2 >> >> So it seems that this issue's root cause is in the AM335x USB interrupt >> handling, and not the Wi-Fi rt2800 driver. > > Having applied two AM335x USB patches in the 3.14.49 kernel, that does seem to resolve the soft lock-up on the RX side. The two patches are: > > http://marc.info/?l=linux-usb&m=146173995117456&w=2 > http://marc.info/?l=linux-usb&m=146222355213935&w=2 > > But I am finding there is still a lock-up issue when unplugging from a hub, this time on the TX side. It is more likely if there is Wi-Fi traffic in progress when the unplug occurs. I'm attaching a log. Essentially there are a heap of lines (100 or so per second): > > [ 1866.693511] ieee80211 phy7: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 > > Which finally stop shortly after USB disconnect is detected: > > [ 1866.985854] usb 1-1.3: USB disconnect, device number 10 > > However that disconnect message is typically 30-90 seconds after the unplug happened. It seems that the USB disconnect detection is delayed due to the CPU load of the TX. > > I also sometimes see a kernel panic. That can occur whether connected to a USB hub or directly to the on-board USB port. See the attached log. > > I'm not so familiar with either the Wi-Fi or USB stacks in the Linux kernel, so I would appreciate any advice with debugging and fixing this. (My previous investigations indicate these issues are present in both 3.14.x kernel and 4.4.6 kernel. I'm more familiar with working with the 3.14.x kernel under Yocto, but I could try moving to 4.4.6 kernel for Ubuntu. I'm open to advice on which to investigate on.) Take a look at this patch: http://marc.info/?l=linux-usb&m=146222355213935&w=2 If it fixes your issue please provide your "tested-by" tag here. Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
