When chip attach fails, brcmf_sdiod_intr_unregister is being called
but that is too early as sdiodev->settings has not been set yet
nor has brcmf_sdiod_intr_register been called.
Change to use oob_irq_requested + newly created sd_irq_requested
to decide on what to unregister at intr_unregister time.
Steps to reproduce problem:
- modprobe brcmfmac using buggy FW
- rmmod brcmfmac
- modprobe brcmfmac again.
If done with a buggy firmware, brcm_chip_attach will fail on the
2nd modprobe triggering the call to intr_unregister and the
kernel oops when attempting to de-reference sdiodev->settings->bus.sdio
which has not yet been set.
Signed-off-by: Christian Daudt <csd@xxxxxxxxxxxx>
---
.../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 30 ++++++++++++----------
.../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 1 +
2 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index da0cdd3..09635a9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -166,6 +166,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler);
sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler);
sdio_release_host(sdiodev->func[1]);
+ sdiodev->sd_irq_requested = true;
}
return 0;
@@ -173,27 +174,30 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
- struct brcmfmac_sdio_pd *pdata;
- brcmf_dbg(SDIO, "Entering\n");
+ brcmf_dbg(SDIO, "Entering oob=%d sd=%d\n",
+ sdiodev->oob_irq_requested,
+ sdiodev->sd_irq_requested);
- pdata = &sdiodev->settings->bus.sdio;
- if (pdata->oob_irq_supported) {
+ if (sdiodev->oob_irq_requested) {
+ struct brcmfmac_sdio_pd *pdata;
+
+ pdata = &sdiodev->settings->bus.sdio;
sdio_claim_host(sdiodev->func[1]);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
sdio_release_host(sdiodev->func[1]);
- if (sdiodev->oob_irq_requested) {
- sdiodev->oob_irq_requested = false;
- if (sdiodev->irq_wake) {
- disable_irq_wake(pdata->oob_irq_nr);
- sdiodev->irq_wake = false;
- }
- free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev);
- sdiodev->irq_en = false;
+ sdiodev->oob_irq_requested = false;
+ if (sdiodev->irq_wake) {
+ disable_irq_wake(pdata->oob_irq_nr);
+ sdiodev->irq_wake = false;
}
- } else {
+ free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev);
+ sdiodev->irq_en = false;
+ }
+
+ if (sdiodev->sd_irq_requested) {
sdio_claim_host(sdiodev->func[1]);
sdio_release_irq(sdiodev->func[2]);
sdio_release_irq(sdiodev->func[1]);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index dcf0ce8c..c07ad25 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -186,6 +186,7 @@ struct brcmf_sdio_dev {
struct brcmf_bus *bus_if;
struct brcmf_mp_device *settings;
bool oob_irq_requested;
+ bool sd_irq_requested;
bool irq_en; /* irq enable flags */
spinlock_t irq_en_lock;
bool irq_wake; /* irq wake enable flags */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
