From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
All gen1 parts use the same enable_rf() function, so rename it to
reflect this.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 1499aa0..a2f5609 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -2076,7 +2076,7 @@ static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data)
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
}
-static void rtl8723a_enable_rf(struct rtl8xxxu_priv *priv)
+static void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv)
{
u8 val8;
u32 val32;
@@ -9881,7 +9881,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
.config_channel = rtl8xxxu_gen1_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
- .enable_rf = rtl8723a_enable_rf,
+ .enable_rf = rtl8xxxu_gen1_enable_rf,
.disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
@@ -9953,7 +9953,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
.config_channel = rtl8xxxu_gen1_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
- .enable_rf = rtl8723a_enable_rf,
+ .enable_rf = rtl8xxxu_gen1_enable_rf,
.disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
