From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Load the RF table in init_phy_rf(), which allows for applying device
specific RF hacks in the same place. Getting rid of more ugly if ()
clutter.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 133 ++++++++++++++---------
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
2 files changed, 80 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index b88cf16..50ca3eb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -4015,6 +4015,80 @@ static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
return 0;
}
+static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+ int ret;
+
+ ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A);
+
+ /* Reduce 80M spur */
+ rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+
+ return ret;
+}
+
+static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+ int ret;
+
+ ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A);
+ /*
+ * PHY LCK
+ */
+ rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
+ msleep(200);
+ rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
+
+ return ret;
+}
+
+#ifdef CONFIG_RTL8XXXU_UNTESTED
+static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+ struct rtl8xxxu_rfregval *rftable;
+ int ret;
+
+ if (priv->rtl_chip == RTL8188C) {
+ if (priv->hi_pa)
+ rftable = rtl8188ru_radioa_1t_highpa_table;
+ else
+ rftable = rtl8192cu_radioa_1t_init_table;
+ ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+ } else if (priv->rf_paths == 1) {
+ rftable = rtl8192cu_radioa_1t_init_table;
+ ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+ } else {
+ rftable = rtl8192cu_radioa_2t_init_table;
+ ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+ if (ret)
+ goto exit;
+ rftable = rtl8192cu_radiob_2t_init_table;
+ ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
+ }
+
+exit:
+ return ret;
+}
+#endif
+
+static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+ int ret;
+
+ ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A);
+ if (ret)
+ goto exit;
+
+ ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B);
+
+exit:
+ return ret;
+}
+
static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data)
{
int ret = -EBUSY;
@@ -7552,7 +7626,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
{
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
- struct rtl8xxxu_rfregval *rftable;
bool macpower;
int ret;
u8 val8;
@@ -7617,59 +7690,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
if (ret)
goto exit;
- switch(priv->rtl_chip) {
- case RTL8723A:
- rftable = rtl8723au_radioa_1t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-
- /* Reduce 80M spur */
- rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
- break;
- case RTL8723B:
- rftable = rtl8723bu_radioa_1t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
- /*
- * PHY LCK
- */
- rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
- rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
- msleep(200);
- rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
- break;
- case RTL8188C:
- if (priv->hi_pa)
- rftable = rtl8188ru_radioa_1t_highpa_table;
- else
- rftable = rtl8192cu_radioa_1t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
- break;
- case RTL8191C:
- rftable = rtl8192cu_radioa_1t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
- break;
- case RTL8192C:
- rftable = rtl8192cu_radioa_2t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
- if (ret)
- break;
- rftable = rtl8192cu_radiob_2t_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
- break;
- case RTL8192E:
- rftable = rtl8192eu_radioa_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
- if (ret)
- break;
- rftable = rtl8192eu_radiob_init_table;
- ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
- break;
- default:
- ret = -EINVAL;
- }
-
+ ret = priv->fops->init_phy_rf(priv);
if (ret)
goto exit;
@@ -9715,6 +9736,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.reset_8051 = rtl8xxxu_reset_8051,
.llt_init = rtl8xxxu_init_llt_table,
.init_phy_bb = rtl8723au_init_phy_bb,
+ .init_phy_rf = rtl8723au_init_phy_rf,
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.config_channel = rtl8723au_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
@@ -9747,6 +9769,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
.reset_8051 = rtl8723bu_reset_8051,
.llt_init = rtl8xxxu_auto_llt_table,
.init_phy_bb = rtl8723bu_init_phy_bb,
+ .init_phy_rf = rtl8723bu_init_phy_rf,
.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.config_channel = rtl8723bu_config_channel,
@@ -9785,6 +9808,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.reset_8051 = rtl8xxxu_reset_8051,
.llt_init = rtl8xxxu_init_llt_table,
.init_phy_bb = rtl8723au_init_phy_bb,
+ .init_phy_rf = rtl8192cu_init_phy_rf,
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.config_channel = rtl8723au_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
@@ -9819,6 +9843,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
.reset_8051 = rtl8xxxu_reset_8051,
.llt_init = rtl8xxxu_auto_llt_table,
.init_phy_bb = rtl8192eu_init_phy_bb,
+ .init_phy_rf = rtl8192eu_init_phy_rf,
.phy_iq_calibrate = rtl8192eu_phy_iq_calibrate,
.config_channel = rtl8723bu_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index da86f3f..3efbb60 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1284,6 +1284,7 @@ struct rtl8xxxu_fileops {
void (*reset_8051) (struct rtl8xxxu_priv *priv);
int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
void (*init_phy_bb) (struct rtl8xxxu_priv *priv);
+ int (*init_phy_rf) (struct rtl8xxxu_priv *priv);
void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
void (*config_channel) (struct ieee80211_hw *hw);
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
