From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Instead use tx_desc_size() to distinguish between gen1
(8723a/8192c/8188c) and gen2 (8723b/8192e) parts.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 7ab009f..8b0b6c9 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -2758,7 +2758,8 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
} else if (val32 & SYS_CFG_TYPE_ID) {
bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
bonding &= HPON_FSM_BONDING_MASK;
- if (priv->fops->has_s0s1) {
+ if (priv->fops->tx_desc_size ==
+ sizeof(struct rtl8xxxu_txdesc40)) {
if (bonding == HPON_FSM_BONDING_1T2R) {
sprintf(priv->chip_name, "8191EU");
priv->rf_paths = 2;
@@ -7993,7 +7994,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
/*
* This should enable thermal meter
*/
- if (priv->fops->has_s0s1)
+ if (priv->fops->tx_desc_size == sizeof(struct rtl8xxxu_txdesc40))
rtl8xxxu_write_rfreg(priv,
RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
else
@@ -9867,7 +9868,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
- .has_s0s1 = 1,
+ .has_s0s1 = 0,
.adda_1t_init = 0x0fc01616,
.adda_1t_path_on = 0x0fc01616,
.adda_2t_path_on_a = 0x0fc01616,
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
