From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Pick PHY init table based on device before distinguishing between
1T/2T/high PA tables. The latter is only currently used for
8188cu/8192cu/8188ru.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index fa6ab85..d6abe27 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -3637,11 +3637,7 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
- if (priv->hi_pa)
- rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table);
- else if (priv->tx_paths == 2)
- rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table);
- else if (priv->rtl_chip == RTL8723B) {
+ if (priv->rtl_chip == RTL8723B) {
/*
* Why?
*/
@@ -3656,10 +3652,13 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table);
- } else
+ } else if (priv->hi_pa)
+ rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table);
+ else if (priv->tx_paths == 2)
+ rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table);
+ else
rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table);
-
if (priv->rtl_chip == RTL8188C && priv->hi_pa &&
priv->vendor_umc && priv->chip_cut == 1)
rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50);
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
