From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Set HIMR[01] on 8192eu instead of HISR/HIMR. It's not obvious this
really matters for USB devices, but this matches the register writes
performed by the vendor driver.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 3c732ed..eac2a54 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -6883,11 +6883,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write8(priv, 0xfe42, 0x80);
}
- if (priv->rtl_chip == RTL8192E) {
- rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
- rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
- }
-
if (priv->fops->phy_init_antenna_selection)
priv->fops->phy_init_antenna_selection(priv);
@@ -7053,11 +7048,16 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
*/
rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4);
- /*
- * Enable all interrupts - not obvious USB needs to do this
- */
- rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
- rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
+ if (priv->rtl_chip == RTL8192E) {
+ rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
+ rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
+ } else {
+ /*
+ * Enable all interrupts - not obvious USB needs to do this
+ */
+ rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
+ rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
+ }
rtl8xxxu_set_mac(priv);
rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION);
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
