Upon firmware assert, restart work will be triggered so that mac80211
will reconfigure the driver. An issue is reported that after restart
work, survey dump data do not contain in-use (SURVEY_INFO_IN_USE) info
for operating channel. During reconfigure, since mac80211 already has
valid channel context for given radio, channel context iteration return
num_chanctx > 0. Hence rx_channel is always NULL. Fix this by assigning
channel context to rx_channel when driver restart is in progress.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b0e613bc10a5..e31469dd58dd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6867,7 +6867,13 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
def = &vifs[0].new_ctx->def;
ar->rx_channel = def->chan;
- } else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) {
+ } else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) ||
+ (ctx && (ar->state == ATH10K_STATE_RESTARTED))) {
+ /* During driver restart due to firmware assert, since mac80211
+ * already has valid channel context for given radio, channel
+ * context iteration return num_chanctx > 0. So fix rx_channel
+ * when restart is in progress.
+ */
ar->rx_channel = ctx->def.chan;
} else {
ar->rx_channel = NULL;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
