On Thu, 2016-03-24 at 19:30 +0100, Arend Van Spriel wrote:
>
> On 24-3-2016 16:12, Emmanuel Grumbach wrote:
> > This allows user space to start/stop NAN interface.
> > A NAN interface is like P2P device in a few aspects: it
> > doesn't have a netdev associated to it.
> > Add the new interface type and prevent operations that
> > can't be executed on NAN interface like scan.
> > Define several attributes that may be configured by user space
> > when starting NAN functionality (master preference and dual
> > band operation)
> >
> > Signed-off-by: Andrei Otcheretianski <
> > andrei.otcheretianski@xxxxxxxxx>
> > Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
> > ---
> > v2: allow master preference 1 and 255 as required by the
> > certification
> > ---
> > include/net/cfg80211.h | 21 +++++++++-
> > include/uapi/linux/nl80211.h | 44 ++++++++++++++++++++
> > net/mac80211/cfg.c | 2 +
> > net/mac80211/chan.c | 3 ++
> > net/mac80211/iface.c | 4 ++
> > net/mac80211/offchannel.c | 1 +
> > net/mac80211/rx.c | 3 ++
> > net/mac80211/util.c | 1 +
> > net/wireless/chan.c | 2 +
> > net/wireless/core.c | 34 ++++++++++++++++
> > net/wireless/core.h | 3 ++
> > net/wireless/mlme.c | 1 +
> > net/wireless/nl80211.c | 96
> > ++++++++++++++++++++++++++++++++++++++++++--
> > net/wireless/rdev-ops.h | 20 +++++++++
> > net/wireless/trace.h | 27 +++++++++++++
> > net/wireless/util.c | 6 ++-
> > 16 files changed, 261 insertions(+), 7 deletions(-)
> >
> > diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> > index 9e1b24c..cb5ab88 100644
> > --- a/include/net/cfg80211.h
> > +++ b/include/net/cfg80211.h
> > @@ -2228,6 +2228,19 @@ struct cfg80211_qos_map {
> > };
> >
> > /**
> > + * struct cfg80211_nan_conf - nan configuration
> > + *
> > + * This struct defines nan configuration parameters
> > + *
> > + * @master_pref: master preference (2 -254)
>
> This seems to contradict the change log above...
Thanks for catching this.
>
> > + * @dual: dual band operation mode
> > + */
> > +struct cfg80211_nan_conf {
> > + u8 master_pref;
> > + enum nl80211_nan_dual_band_conf dual;
> > +};
> > +
> > +/**
> > * struct cfg80211_ops - backend description for wireless
> > configuration
> > *
> > * This struct is registered by fullmac card drivers and/or
> > wireless stacks
> > @@ -2500,6 +2513,8 @@ struct cfg80211_qos_map {
> > * and returning to the base channel for communication with
> > the AP.
> > * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS
> > peer. Both
> > * peers must be on the base channel when the call
> > completes.
> > + * @start_nan: Start the NAN interface.
> > + * @stop_nan: Stop the NAN interface.
> > */
> > struct cfg80211_ops {
> > int (*suspend)(struct wiphy *wiphy, struct
> > cfg80211_wowlan *wow);
> > @@ -2765,6 +2780,9 @@ struct cfg80211_ops {
> > void (*tdls_cancel_channel_switch)(struct wiphy
> > *wiphy,
> > struct net_device
> > *dev,
> > const u8 *addr);
> > + int (*start_nan)(struct wiphy *wiphy, struct
> > wireless_dev *wdev,
> > + struct cfg80211_nan_conf *conf);
> > + void (*stop_nan)(struct wiphy *wiphy, struct
> > wireless_dev *wdev);
> > };
> >
> > /*
> > @@ -3486,6 +3504,7 @@ struct cfg80211_cached_keys;
> > * beacons, 0 when not valid
> > * @address: The address for this device, valid only if @netdev is
> > %NULL
> > * @p2p_started: true if this is a P2P Device that has been
> > started
> > + * @nan_started: true if this is a NAN interface that has been
> > started
> > * @cac_started: true if DFS channel availability check has been
> > started
> > * @cac_start_time: timestamp (jiffies) when the dfs state was
> > entered.
> > * @cac_time_ms: CAC time in ms
> > @@ -3517,7 +3536,7 @@ struct wireless_dev {
> >
> > struct mutex mtx;
> >
> > - bool use_4addr, p2p_started;
> > + bool use_4addr, p2p_started, nan_started;
> >
> > u8 address[ETH_ALEN] __aligned(sizeof(u16));
> >
> > diff --git a/include/uapi/linux/nl80211.h
> > b/include/uapi/linux/nl80211.h
> > index 5a30a75..e5a7cfb 100644
> > --- a/include/uapi/linux/nl80211.h
> > +++ b/include/uapi/linux/nl80211.h
> > @@ -824,6 +824,16 @@
> > * not running. The driver indicates the status of the scan
> > through
> > * cfg80211_scan_done().
> > *
> > + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
> > + * %NL80211_ATTR_WDEV interface. This interface must have
> > been previously
> > + * created with %NL80211_CMD_NEW_INTERFACE. After it has
> > been started, the
> > + * NAN interface will create or join a cluster. This
> > command must have a
> > + * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and
> > optional
> > + * %NL80211_ATTR_NAN_DUAL attributes.
> > + * After this command NAN functions can be added.
> > + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
> > + * its %NL80211_ATTR_WDEV interface.
> > + *
> > * @NL80211_CMD_MAX: highest used command number
> > * @__NL80211_CMD_AFTER_LAST: internal use
> > */
> > @@ -1012,6 +1022,9 @@ enum nl80211_commands {
> >
> > NL80211_CMD_ABORT_SCAN,
> >
> > + NL80211_CMD_START_NAN,
> > + NL80211_CMD_STOP_NAN,
> > +
> > /* add new commands above here */
> >
> > /* used to define NL80211_CMD_MAX below */
> > @@ -1796,6 +1809,12 @@ enum nl80211_commands {
> > * connecting to a PCP, and in %NL80211_CMD_START_AP to
> > start
> > * a PCP instead of AP. Relevant for DMG networks only.
> > *
> > + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used
> > by
> > + * &NL80211_CMD_START_NAN. Its type is u8 and it can't be
> > 0, 1 or 255.
>
> ... and this as well.
>
Yup - I'll repost
> Regards,
> Arend��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
