Hi Hui, Excellent find. Looks like a perfect solution to me. Regards, Hante -----Original Message----- From: Hui Wang [mailto:hui.wang@xxxxxxxxxxxxx] Sent: Wednesday, March 09, 2016 8:25 AM To: brudley@xxxxxxxxxxxx; arend@xxxxxxxxxxxx; frankyl@xxxxxxxxxxxx; meuleman@xxxxxxxxxxxx; pieterpg@xxxxxxxxxxxx Cc: linux-wireless@xxxxxxxxxxxxxxx; brcm80211-dev-list@xxxxxxxxxxxx; hui.wang@xxxxxxxxxxxxx Subject: [PATCH] brcmfmac: Remove waitqueue_active check We met a problem of pm_suspend when repeated closing/opening the lid on a Lenovo laptop (1/20 reproduce rate), below is the log: [ 199.735876] PM: Entering mem sleep [ 199.750516] e1000e: EEE TX LPI TIMER: 00000011 [ 199.856638] Trying to free nonexistent resource <000000000000d000-000000000000d0ff> [ 201.753566] brcmfmac: brcmf_pcie_suspend: Timeout on response for entering D3 substate [ 201.753581] pci_legacy_suspend(): brcmf_pcie_suspend+0x0/0x1f0 [brcmfmac] returns -5 [ 201.753585] dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -5 [ 201.753589] PM: Device 0000:04:00.0 failed to suspend async: error -5 Through debugging, we found when problem happens, it is not the device fails to enter D3, but the signal D3_ACK comes too early to pass the waitqueue_active() check. Just like this: brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D3_INFORM); // signal is triggered here wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed, BRCMF_PCIE_MBDATA_TIMEOUT); So far I think it is safe to remove waitqueue_active check since there is only one place to trigger this signal (sending BRCMF_H2D_HOST_D3_INFORM). And it is not a problem calling wake_up event earlier than calling wait_event. Cc: Brett Rudley <brudley@xxxxxxxxxxxx> Cc: Hante Meuleman <meuleman@xxxxxxxxxxxx> Cc: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx> Cc: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx> Cc: Arend van Spriel <arend@xxxxxxxxxxxx> Signed-off-by: Hui Wang <hui.wang@xxxxxxxxxxxxx> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 0480b70..5f12ff3 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -675,10 +675,8 @@ static void brcmf_pcie_handle_mb_data(struct brcmf_pciedev_info *devinfo) brcmf_dbg(PCIE, "D2H_MB_DATA: DEEP SLEEP EXIT\n"); if (dtoh_mb_data & BRCMF_D2H_DEV_D3_ACK) { brcmf_dbg(PCIE, "D2H_MB_DATA: D3 ACK\n"); - if (waitqueue_active(&devinfo->mbdata_resp_wait)) { - devinfo->mbdata_completed = true; - wake_up(&devinfo->mbdata_resp_wait); - } + devinfo->mbdata_completed = true; + wake_up(&devinfo->mbdata_resp_wait); } } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
