On Wed, Mar 2, 2016 at 12:43 PM, Stefan Feirer <e0926020@xxxxxxxxxxxxxxxxxxxx> wrote: > > Hello, > > I'm trying to make different wifi roaming tests with the 802.11 amandments 802.11k and 802.11r. > I use the intel wifi chipset Intel Corporation Centrino Ultimate-N 6300 and two Aerohive Access Points AP141 (with both 802.11k and 802.11r enabled). > With using wpa_supplicant (Version 2.5) and wpa_cli (Version 2.5) I was able to connect and roam between the APs by entering the command "roam <mac>" and actually an 802.11r roam was performed. Therefore the nl80211 and iwlwifi driver was used. > So fast roaming seems to work properly, but I faced troubles with Radio Resource Management (802.11k) > > Transmitting the command "neighbor_rep_request" in wpa_cli failed. I checked to log files and found the following lines: > > wlan0: Control interface command 'NEIGHBOR_REP_REQUEST' > RRM: No RRM in current connection. > > and > > RRM: Determining whether RRM can be used - device support: 0x0 > RRM: Insufficient RRM support in driver - do not use RRM > > Now my question would be how to enable RRM, maybe using the iw-command? > I could not find any documenation or examples according to RRM. > The tests were performed with Ubuntu and Linux Kernel 3.13.0-79. > Look at https://patchwork.kernel.org/patch/8421041/ If the suggestion of Johannes is the direction taken (which happens quite often in mac8021..) then you'll get it. > I hope there is someone who can help me! > Thanks, Stefan Feirer > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
