From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
This should initialize the antennas on the 8723bu, but so far I am
still not receiving anything :( More work is needed.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 87 +++++++++++++++++++++-
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 15 +++-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 +
3 files changed, 98 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 1626bd8..937b495 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -5603,10 +5603,87 @@ static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv)
rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e);
}
-static void rtl8xxxu_init_bt(struct rtl8xxxu_priv *priv)
+static void rtl8723bu_init_bt(struct rtl8xxxu_priv *priv)
{
- if (!priv->has_bluetooth)
- return;
+ struct h2c_cmd h2c;
+ u32 val32;
+ u8 val8;
+
+ /*
+ * No indication anywhere as to what 0x0790 does. The 2 antenna
+ * vendor code preserves bits 6-7 here.
+ */
+ rtl8xxxu_write8(priv, 0x0790, 0x05);
+ /*
+ * 0x0778 seems to be related to enabling the number of antennas
+ * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it
+ * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01
+ */
+ rtl8xxxu_write8(priv, 0x0778, 0x01);
+
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+ val8 |= BIT(5);
+ rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
+
+ /*
+ * Set BT grant to low
+ */
+ memset(&h2c, 0, sizeof(struct h2c_cmd));
+ h2c.bt_grant.cmd = H2C_8723B_BT_GRANT;
+ h2c.bt_grant.data = 0;
+ rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant));
+
+ /*
+ * WLAN action by PTA
+ */
+ rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x0c);
+
+ /*
+ * BT select S0/S1 controlled by WiFi
+ */
+ val8 = rtl8xxxu_read8(priv, 0x0067);
+ val8 |= BIT(5);
+ rtl8xxxu_write8(priv, 0x0067, val8);
+
+ val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+ val32 |= BIT(11);
+ rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
+
+ /*
+ * Bits 6/7 are marked in/out ... but for what?
+ */
+ rtl8xxxu_write8(priv, 0x0974, 0xff);
+
+ val32 = rtl8xxxu_read32(priv, 0x0944);
+ val32 |= (BIT(0) | BIT(1));
+ rtl8xxxu_write32(priv, 0x0944, val32);
+
+ rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
+
+ val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+ val32 &= ~BIT(24);
+ val32 |= BIT(23);
+ rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+ /*
+ * Fix external switch Main->S1, Aux->S0
+ */
+ val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
+ val8 &= ~BIT(0);
+ rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+
+ memset(&h2c, 0, sizeof(struct h2c_cmd));
+ h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV;
+ h2c.ant_sel_rsv.ant_inverse = 1;
+ h2c.ant_sel_rsv.int_switch_type = 0;
+ rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv));
+
+ /*
+ * 0x280, 0x00, 0x200, 0x80 - not clear
+ */
+ rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x280);
}
static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
@@ -5933,7 +6010,8 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
/* Init BT hw config. */
- rtl8xxxu_init_bt(priv);
+ if (priv->fops->init_bt)
+ priv->fops->init_bt(priv);
/* Set NAV_UPPER to 30000us */
val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
@@ -7469,6 +7547,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.config_channel = rtl8723bu_config_channel,
+ .init_bt = rtl8723bu_init_bt,
.writeN_block_size = 1024,
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index bce52cd..bcbdc78 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -696,8 +696,9 @@ enum h2c_cmd_8723b {
H2C_8723B_BT_MP_OPER = 0x67,
H2C_8723B_BT_CONTROL = 0x68,
H2C_8723B_BT_WIFI_CTRL = 0x69,
- H2C_8723B_BT_FW_PATCH = 0x6A,
- H2C_8723B_BT_WLAN_CALIBRATION = 0x6D,
+ H2C_8723B_BT_FW_PATCH = 0x6a,
+ H2C_8723B_BT_WLAN_CALIBRATION = 0x6d,
+ H2C_8723B_BT_GRANT = 0x6e,
/*
* WOWLAN Class: 100
@@ -743,6 +744,15 @@ struct h2c_cmd {
u8 cmd;
u8 data;
} __packed bt_wlan_calibration;
+ struct {
+ u8 cmd;
+ u8 ant_inverse;
+ u8 int_switch_type;
+ } __packed ant_sel_rsv;
+ struct {
+ u8 cmd;
+ u8 data;
+ } __packed bt_grant;
};
};
@@ -862,6 +872,7 @@ struct rtl8xxxu_fileops {
void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
void (*config_channel) (struct ieee80211_hw *hw);
+ void (*init_bt) (struct rtl8xxxu_priv *priv);
int writeN_block_size;
u16 mbox_ext_reg;
char mbox_ext_width;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index 147deba..248f64c 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -721,6 +721,8 @@
#define REG_BT_CONTROL_8723BU 0x0764
#define BT_CONTROL_BT_GRANT BIT(12)
+#define REG_WLAN_ACT_CONTROL_8723B 0x076e
+
#define REG_FPGA0_RF_MODE 0x0800
#define FPGA_RF_MODE BIT(0)
#define FPGA_RF_MODE_JAPAN BIT(1)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
