From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Implement burst parameter sequence for 8723bu parts. Eventually this
should be moved into device specific sections.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 33 ++++++++++++++++++++++
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 5 +++-
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 835eca8..ecd0f59 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -6279,6 +6279,39 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
/*
+ * Initialize burst parameters
+ */
+ if (priv->rtlchip == 0x8723b) {
+ /*
+ * For USB high speed set 512B packets
+ */
+ val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
+ val8 &= ~(BIT(4) | BIT(5));
+ val8 |= BIT(4);
+ val8 |= BIT(1) | BIT(2) | BIT(3);
+ rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8);
+
+ /*
+ * For USB high speed set 512B packets
+ */
+ val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B);
+ val8 |= BIT(7);
+ rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
+
+ rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14);
+ rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e);
+ rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
+ rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
+ rtl8xxxu_write8(priv, REG_PIFS, 0x00);
+ rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50);
+ rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50);
+
+ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+ val8 |= BIT(5) | BIT(6);
+ rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+ }
+
+ /*
* Enable CCK and OFDM block
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index 5250388..8209830 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -405,7 +405,7 @@
/* Presumably only found on newer chips such as 8723bu */
#define REG_RX_DMA_CTRL_8723B 0x0286
-#define REG_RX_DMA_MODE_CTRL_8723B 0x0290
+#define REG_RXDMA_PRO_8723B 0x0290
#define REG_RF_BB_CMD_ADDR 0x02c0
#define REG_RF_BB_CMD_DATA 0x02c4
@@ -478,6 +478,7 @@
#define REG_ARFR1 0x0448
#define REG_ARFR2 0x044c
#define REG_ARFR3 0x0450
+#define REG_AMPDU_MAX_TIME_8723B 0x0456
#define REG_AGGLEN_LMT 0x0458
#define REG_AMPDU_MIN_SPACE 0x045c
#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045d
@@ -496,6 +497,7 @@
#define REG_PKT_VO_VI_LIFE_TIME 0x04c0
#define REG_PKT_BE_BK_LIFE_TIME 0x04c2
#define REG_STBC_SETTING 0x04c4
+#define REG_HT_SINGLE_AMPDU_8723B 0x04c7
#define REG_PROT_MODE_CTRL 0x04c8
#define REG_MAX_AGGR_NUM 0x04ca
#define REG_RTS_MAX_AGGR_NUM 0x04cb
@@ -560,6 +562,7 @@
#define BEACON_DMA_ATIME_INT_TIME 2
#define REG_ATIMWND 0x055a
+#define REG_USTIME_TSF_8723B 0x055c
#define REG_BCN_MAX_ERR 0x055d
#define REG_RXTSF_OFFSET_CCK 0x055e
#define REG_RXTSF_OFFSET_OFDM 0x055f
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
