From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx> Older chips use RF register 0x24 to set the thermal meter. Newer chips use register 0x42. This change makes sure to set the correct thermal meter register depending on the chip. Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index cca3b92..6825351 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -6502,7 +6502,11 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) /* * This should enable thermal meter */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, + RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); + else + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); /* Init BT hw config. */ if (priv->fops->init_bt) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
