On Monday 08 February 2016 02:15:26 Amitkumar Karwar wrote:
> diff --git a/Documentation/devicetree/bindings/mwifiex.txt b/Documentation/devicetree/bindings/mwifiex.txt
> new file mode 100644
> index 0000000..39b6a74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mwifiex.txt
> @@ -0,0 +1,29 @@
> +mwifiex
> +------
> +
> +Required properties:
> +
> + - name : must be "mwifiex"
This is a very unusual requirement.
Can you use one of the standard device names instead?
> + - compatible : must be "marvell,mwifiex"
> +
> +Optional properties:
> +
> + - mwifiex,caldata* : A series of properties with marvell,caldata prefix,
> + represent Calibration data downloaded to the device during
> + initialization. This is an array of unsigned values.
> +
> +
> +Example:
> +
> +Tx power limit calibration data is configured in below example.
> +The calibration data is an array of unsigned values, the length
> +can vary between hw versions.
> +
> +mwifiex {
> + compatible = "marvell,mwifiex";
> +
> + mwifiex,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
> +0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01 ...>;
> +
> +};
Should we list the mac-address here as well, or is there always an eeprom
for that but not the calibration data?
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
