Hello,
On Tue, Feb 02, 2016 at 05:05:38PM +0100, Sebastian Reichel wrote:
> On Tue, Feb 02, 2016 at 04:41:13PM +1100, Ross Green wrote:
> > On Tue, Feb 2, 2016 at 3:34 PM, Sebastian Reichel <sre@xxxxxxxxxx> wrote:
> > > On Mon, Feb 01, 2016 at 11:38:38PM +1100, Ross Green wrote:
> > >> On Mon, Jan 25, 2016 at 11:47 PM, Ross Green <rgkernel@xxxxxxxxx> wrote:
> > >> > Just tried the new kernel release on faithful pandaboard es with the
> > >> > new 4.5-rc1 release.
> > >> >
> > >> > There is a problem with the wifi modules once the modules are loaded.
> > >> > Looks like the wifi firmware gets loaded put no response after that
> > >> > causing recovery action.
> > >> >
> > >> > the kernel 4.4 works quite happily with this board.
> > >> >
> > >> > Here is a dmesg dump in the attachment.
> > >> >
> > >> > Anyone have any ideas here?
> >
> > [...]
> >
> > If I get time, this evening, I'll see if I can give a bisect a try.
>
> On N950 [wl1271 via SPI, using extra patches to init from DT] I get wifi
> working again on 4.5-rc1 with 3719c17e1816 ("wlcore/wl18xx: fw logger
> over sdio") reverted.
Reverting the changes in wlcore_set_partition() as below seem to help.
Best regards,
Emil Goode
8<--------
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -175,14 +175,15 @@ int wlcore_set_partition(struct wl1271 *wl,
if (ret < 0)
goto out;
+ /*
+ * We don't need the size of the last partition, as it is
+ * automatically calculated based on the total memory size and
+ * the sizes of the previous partitions.
+ */
ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
if (ret < 0)
goto out;
- ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size);
- if (ret < 0)
- goto out;
-
out:
return ret;
}
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 6c257b5..10cf374 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -36,8 +36,8 @@
#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12)
#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16)
#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20)
-#define HW_PART3_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
-#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 28)
+#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
+
#define HW_ACCESS_REGISTER_SIZE 4
#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
