There's a new firmware feature which uses a shared DMA memory so host can share it's per-sta per-tid queue size which is then subsequently used for firmware to assist in deciding which frames to put on the intermediate host-device tx queue. This patchset adds only basic support to make the firmware supporting the feature happy and running at all. Without it firmware would freeze shortly after booting. More patches will follow some time later to add the "new data path" logic. v2: * fix gfp allocation [Ben] Michal Kazior (5): ath10k: rename some HTT events ath10k: add new htt definitions ath10k: add new FW_FEATURE_PEER_FLOW_CONTROL ath10k: clean up cont frag desc init code ath10k: implement basic support for new tx path firmware drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 9 ++ drivers/net/wireless/ath/ath10k/htt.c | 8 +- drivers/net/wireless/ath/ath10k/htt.h | 169 +++++++++++++++++++++++++++++-- drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +- drivers/net/wireless/ath/ath10k/htt_tx.c | 146 +++++++++++++++++++++----- 6 files changed, 302 insertions(+), 39 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
