Search Linux Wireless

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The power function uses a consumer regulator access to update the WiFi
enable GPIO value.

Signed-off-by: Uri Mashiach <uri.mashiach@xxxxxxxxxxxxxx>
---
v1 -> v2: oops fix was removed to a separate fix.
v2 -> v3: no changes
v3 -> v4: update devm_regulator_get() error handling.

 drivers/net/wireless/ti/wlcore/spi.c | 39 ++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 44f059f..dec1512 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
 #include "wl12xx_80211.h"
@@ -81,6 +82,7 @@
 struct wl12xx_spi_glue {
 	struct device *dev;
 	struct platform_device *core;
+	struct regulator *reg; /* Power regulator */
 };
 
 static void wl12xx_spi_reset(struct device *child)
@@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 	return 0;
 }
 
+/**
+ * wl12xx_spi_set_power - power on/off the wl12xx unit
+ * @child: wl12xx device handle.
+ * @enable: true/false to power on/off the unit.
+ *
+ * use the WiFi enable regulator to enable/disable the WiFi unit.
+ */
+static int wl12xx_spi_set_power(struct device *child, bool enable)
+{
+	int ret = 0;
+	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
+
+	WARN_ON(!glue->reg);
+
+	/* Update regulator state */
+	if (enable) {
+		ret = regulator_enable(glue->reg);
+		if (ret)
+			dev_err(child, "Power enable failure\n");
+	} else {
+		ret =  regulator_disable(glue->reg);
+		if (ret)
+			dev_err(child, "Power disable failure\n");
+	}
+
+	return ret;
+}
+
 static struct wl1271_if_operations spi_ops = {
 	.read		= wl12xx_spi_raw_read,
 	.write		= wl12xx_spi_raw_write,
 	.reset		= wl12xx_spi_reset,
 	.init		= wl12xx_spi_init,
+	.power		= wl12xx_spi_set_power,
 	.set_block_size = NULL,
 };
 
@@ -353,6 +384,14 @@ static int wl1271_probe(struct spi_device *spi)
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
 
+	glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+	if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (IS_ERR(glue->reg)) {
+		dev_err(glue->dev, "can't get regulator\n");
+		return PTR_ERR(glue->reg);
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux