The mainline kernel now has the necessary implementations for SMD, SMSM and WCNSS_CTRL. This series provides the changes necessary for the wcn36xx driver to utilize this infrastructure and make this driver work in mainline. A driver for loading the WCNSS firmware, through remoteproc, has been posted here [1]. Upon starting this the necessary SMD channels will be registered, which triggers the probe of the wcn36xx driver. With this, the only missing piece for having fully working Qualcomm WiFi in mainline is the RPM clock-controller, needed by the remoteproc driver for doing XO calibration during boot of the WCNSS core. This is being worked on separately. [1] https://lkml.org/lkml/2015/12/27/185 Bjorn Andersson (4): wcn36xx: Fold indication payload into message header wcn36xx: Change indication list lock to spinlock wcn36xx: Transition driver to SMD client dt: binding: Add Qualcomm wcn36xx WiFi binding .../bindings/net/wireless/qcom,wcn36xx-wifi.txt | 76 ++++++++++++++ drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +- drivers/net/wireless/ath/wcn36xx/dxe.c | 16 +-- drivers/net/wireless/ath/wcn36xx/main.c | 111 ++++++++++++--------- drivers/net/wireless/ath/wcn36xx/smd.c | 51 +++++----- drivers/net/wireless/ath/wcn36xx/smd.h | 6 +- drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 23 ++--- 7 files changed, 188 insertions(+), 97 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,wcn36xx-wifi.txt -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
