This patch add prefix wilc for all functions name because the function name
such as spi_write, spi_read and spi_sync are same as linux spi function.
Hence, this should be done before restructuring wilc_spi.c and
linux_wlan_spi.c later.
Signed-off-by: Glen Lee <glen.lee@xxxxxxxxx>
---
drivers/staging/wilc1000/wilc_spi.c | 108 ++++++++++++++++++------------------
1 file changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index b09b3bd..946bda7 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -25,8 +25,8 @@ typedef struct {
static wilc_spi_t g_spi;
-static int spi_read(u32, u8 *, u32);
-static int spi_write(u32, u8 *, u32);
+static int wilc_spi_read(u32, u8 *, u32);
+static int wilc_spi_write(u32, u8 *, u32);
/********************************************
*
@@ -790,7 +790,7 @@ static int spi_internal_read(u32 adr, u32 *data)
*
********************************************/
-static int spi_write_reg(u32 addr, u32 data)
+static int wilc_spi_write_reg(u32 addr, u32 data)
{
int result = N_OK;
u8 cmd = CMD_SINGLE_WRITE;
@@ -813,7 +813,7 @@ static int spi_write_reg(u32 addr, u32 data)
return result;
}
-static int spi_write(u32 addr, u8 *buf, u32 size)
+static int wilc_spi_write(u32 addr, u8 *buf, u32 size)
{
int result;
u8 cmd = CMD_DMA_EXT_WRITE;
@@ -841,7 +841,7 @@ static int spi_write(u32 addr, u8 *buf, u32 size)
return 1;
}
-static int spi_read_reg(u32 addr, u32 *data)
+static int wilc_spi_read_reg(u32 addr, u32 *data)
{
int result = N_OK;
u8 cmd = CMD_SINGLE_READ;
@@ -867,7 +867,7 @@ static int spi_read_reg(u32 addr, u32 *data)
return 1;
}
-static int spi_read(u32 addr, u8 *buf, u32 size)
+static int wilc_spi_read(u32 addr, u8 *buf, u32 size)
{
u8 cmd = CMD_DMA_EXT_READ;
int result;
@@ -890,20 +890,20 @@ static int spi_read(u32 addr, u8 *buf, u32 size)
*
********************************************/
-static int spi_clear_int(void)
+static int wilc_spi_clear_int(void)
{
u32 reg;
- if (!spi_read_reg(WILC_HOST_RX_CTRL_0, ®)) {
+ if (!wilc_spi_read_reg(WILC_HOST_RX_CTRL_0, ®)) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_HOST_RX_CTRL_0);
return 0;
}
reg &= ~0x1;
- spi_write_reg(WILC_HOST_RX_CTRL_0, reg);
+ wilc_spi_write_reg(WILC_HOST_RX_CTRL_0, reg);
return 1;
}
-static int spi_deinit(void *pv)
+static int wilc_spi_deinit(void *pv)
{
/**
* TODO:
@@ -911,7 +911,7 @@ static int spi_deinit(void *pv)
return 1;
}
-static int spi_sync(void)
+static int wilc_spi_sync(void)
{
u32 reg;
int ret;
@@ -919,13 +919,13 @@ static int spi_sync(void)
/**
* interrupt pin mux select
**/
- ret = spi_read_reg(WILC_PIN_MUX_0, ®);
+ ret = wilc_spi_read_reg(WILC_PIN_MUX_0, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
return 0;
}
reg |= BIT(8);
- ret = spi_write_reg(WILC_PIN_MUX_0, reg);
+ ret = wilc_spi_write_reg(WILC_PIN_MUX_0, reg);
if (!ret) {
PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
return 0;
@@ -934,13 +934,13 @@ static int spi_sync(void)
/**
* interrupt enable
**/
- ret = spi_read_reg(WILC_INTR_ENABLE, ®);
+ ret = wilc_spi_read_reg(WILC_INTR_ENABLE, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
return 0;
}
reg |= BIT(16);
- ret = spi_write_reg(WILC_INTR_ENABLE, reg);
+ ret = wilc_spi_write_reg(WILC_INTR_ENABLE, reg);
if (!ret) {
PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
return 0;
@@ -949,7 +949,7 @@ static int spi_sync(void)
return 1;
}
-static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
+static int wilc_spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
{
u32 reg;
u32 chipid;
@@ -958,7 +958,7 @@ static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
if (isinit) {
- if (!spi_read_reg(0x1000, &chipid)) {
+ if (!wilc_spi_read_reg(0x1000, &chipid)) {
PRINT_ER("[wilc spi]: Fail cmd read chip id...\n");
return 0;
}
@@ -1015,7 +1015,7 @@ static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
/**
* make sure can read back chip id correctly
**/
- if (!spi_read_reg(0x1000, &chipid)) {
+ if (!wilc_spi_read_reg(0x1000, &chipid)) {
PRINT_ER("[wilc spi]: Fail cmd read chip id...\n");
return 0;
}
@@ -1028,16 +1028,16 @@ static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
return 1;
}
-static void spi_max_bus_speed(void)
+static void wilc_spi_max_bus_speed(void)
{
g_spi.spi_max_speed();
}
-static void spi_default_bus_speed(void)
+static void wilc_spi_default_bus_speed(void)
{
}
-static int spi_read_size(u32 *size)
+static int wilc_spi_read_size(u32 *size)
{
int ret;
@@ -1048,7 +1048,7 @@ static int spi_read_size(u32 *size)
u32 tmp;
u32 byte_cnt;
- ret = spi_read_reg(WILC_VMM_TO_HOST_SIZE, &byte_cnt);
+ ret = wilc_spi_read_reg(WILC_VMM_TO_HOST_SIZE, &byte_cnt);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read WILC_VMM_TO_HOST_SIZE ...\n");
goto _fail_;
@@ -1065,7 +1065,7 @@ _fail_:
-static int spi_read_int(u32 *int_status)
+static int wilc_spi_read_int(u32 *int_status)
{
int ret;
@@ -1075,7 +1075,7 @@ static int spi_read_int(u32 *int_status)
u32 tmp;
u32 byte_cnt;
- ret = spi_read_reg(WILC_VMM_TO_HOST_SIZE, &byte_cnt);
+ ret = wilc_spi_read_reg(WILC_VMM_TO_HOST_SIZE, &byte_cnt);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read WILC_VMM_TO_HOST_SIZE ...\n");
goto _fail_;
@@ -1091,11 +1091,11 @@ static int spi_read_int(u32 *int_status)
happended = 0;
- spi_read_reg(0x1a90, &irq_flags);
+ wilc_spi_read_reg(0x1a90, &irq_flags);
tmp |= ((irq_flags >> 27) << IRG_FLAGS_OFFSET);
if (g_spi.nint > 5) {
- spi_read_reg(0x1a94, &irq_flags);
+ wilc_spi_read_reg(0x1a94, &irq_flags);
tmp |= (((irq_flags >> 0) & 0x7) << (IRG_FLAGS_OFFSET + 5));
}
@@ -1121,7 +1121,7 @@ _fail_:
return ret;
}
-static int spi_clear_int_ext(u32 val)
+static int wilc_spi_clear_int_ext(u32 val)
{
int ret;
@@ -1138,13 +1138,13 @@ static int spi_clear_int_ext(u32 val)
for (i = 0; i < g_spi.nint; i++) {
/* No matter what you write 1 or 0, it will clear interrupt. */
if (flags & 1)
- ret = spi_write_reg(0x10c8 + i * 4, 1);
+ ret = wilc_spi_write_reg(0x10c8 + i * 4, 1);
if (!ret)
break;
flags >>= 1;
}
if (!ret) {
- PRINT_ER("[wilc spi]: Failed spi_write_reg, set reg %x ...\n", 0x10c8 + i * 4);
+ PRINT_ER("[wilc spi]: Failed wilc_spi_write_reg, set reg %x ...\n", 0x10c8 + i * 4);
goto _fail_;
}
for (i = g_spi.nint; i < MAX_NUM_INT; i++) {
@@ -1165,7 +1165,7 @@ static int spi_clear_int_ext(u32 val)
if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
tbl_ctl |= BIT(1);
- ret = spi_write_reg(WILC_VMM_TBL_CTL, tbl_ctl);
+ ret = wilc_spi_write_reg(WILC_VMM_TBL_CTL, tbl_ctl);
if (!ret) {
PRINT_ER("[wilc spi]: fail write reg vmm_tbl_ctl...\n");
goto _fail_;
@@ -1175,7 +1175,7 @@ static int spi_clear_int_ext(u32 val)
/**
* enable vmm transfer.
**/
- ret = spi_write_reg(WILC_VMM_CORE_CTL, 1);
+ ret = wilc_spi_write_reg(WILC_VMM_CORE_CTL, 1);
if (!ret) {
PRINT_ER("[wilc spi]: fail write reg vmm_core_ctl...\n");
goto _fail_;
@@ -1187,7 +1187,7 @@ _fail_:
return ret;
}
-static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
+static int wilc_spi_sync_ext(int nint /* how mant interrupts to enable. */)
{
u32 reg;
int ret, i;
@@ -1202,13 +1202,13 @@ static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
/**
* interrupt pin mux select
**/
- ret = spi_read_reg(WILC_PIN_MUX_0, ®);
+ ret = wilc_spi_read_reg(WILC_PIN_MUX_0, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_PIN_MUX_0);
return 0;
}
reg |= BIT(8);
- ret = spi_write_reg(WILC_PIN_MUX_0, reg);
+ ret = wilc_spi_write_reg(WILC_PIN_MUX_0, reg);
if (!ret) {
PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_PIN_MUX_0);
return 0;
@@ -1217,7 +1217,7 @@ static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
/**
* interrupt enable
**/
- ret = spi_read_reg(WILC_INTR_ENABLE, ®);
+ ret = wilc_spi_read_reg(WILC_INTR_ENABLE, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR_ENABLE);
return 0;
@@ -1226,13 +1226,13 @@ static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
for (i = 0; (i < 5) && (nint > 0); i++, nint--) {
reg |= (BIT((27 + i)));
}
- ret = spi_write_reg(WILC_INTR_ENABLE, reg);
+ ret = wilc_spi_write_reg(WILC_INTR_ENABLE, reg);
if (!ret) {
PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR_ENABLE);
return 0;
}
if (nint) {
- ret = spi_read_reg(WILC_INTR2_ENABLE, ®);
+ ret = wilc_spi_read_reg(WILC_INTR2_ENABLE, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed read reg (%08x)...\n", WILC_INTR2_ENABLE);
return 0;
@@ -1242,7 +1242,7 @@ static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
reg |= BIT(i);
}
- ret = spi_read_reg(WILC_INTR2_ENABLE, ®);
+ ret = wilc_spi_read_reg(WILC_INTR2_ENABLE, ®);
if (!ret) {
PRINT_ER("[wilc spi]: Failed write reg (%08x)...\n", WILC_INTR2_ENABLE);
return 0;
@@ -1257,20 +1257,20 @@ static int spi_sync_ext(int nint /* how mant interrupts to enable. */)
*
********************************************/
struct wilc_hif_func hif_spi = {
- spi_init,
- spi_deinit,
- spi_read_reg,
- spi_write_reg,
- spi_read,
- spi_write,
- spi_sync,
- spi_clear_int,
- spi_read_int,
- spi_clear_int_ext,
- spi_read_size,
- spi_write,
- spi_read,
- spi_sync_ext,
- spi_max_bus_speed,
- spi_default_bus_speed,
+ wilc_spi_init,
+ wilc_spi_deinit,
+ wilc_spi_read_reg,
+ wilc_spi_write_reg,
+ wilc_spi_read,
+ wilc_spi_write,
+ wilc_spi_sync,
+ wilc_spi_clear_int,
+ wilc_spi_read_int,
+ wilc_spi_clear_int_ext,
+ wilc_spi_read_size,
+ wilc_spi_write,
+ wilc_spi_read,
+ wilc_spi_sync_ext,
+ wilc_spi_max_bus_speed,
+ wilc_spi_default_bus_speed,
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
