Hi Julien, > From: Julien Cubizolles [mailto:j.cubizolles@xxxxxxx] > Sent: Thursday, November 05, 2015 3:34 AM > To: Amitkumar Karwar > Cc: Dan Williams; linux-wireless@xxxxxxxxxxxxxxx; Nishant Sarmukadam > Subject: Re: mwifiex problem: incompatible network settings > > Amitkumar Karwar <akarwar@xxxxxxxxxxx> writes: > > > Thanks for the logs. I compared your network manager log with the one > > on my setup. Both are same. Basically network manager log doesn't show > > security info (WPA/WPA2, encryption mode etc). So we can't rely on > > that. > > I checked your kernel log shared in previous email. It's incomplete. > > It didn't include information when connection was actually attempted. > > Probably you can run "dmesg -c >> dmesg.log" in loop with some delay > > to capture complete info. Otherwise sharing "/var/log/messages" is > > also an option. > > I have created a driver debug patch(attached). Could you please apply > it and share complete dmesg log? > > I applied your patch. Here are the dmesg logs when logging to a WPA > network with authentification (dmesg-WPA.log, ssid southcentral) and a > network without authentification (dmesg-noWPA.log, ssid FreeWifi). > > Let me know if you need anything else. > > > Btw, do you see the problem if AP is configured in WPA2 security mode? > > Good catch, I changed my access point to WPA2 and now I can connect to > it ! I attached the corresponding dmesg logs (dmesg-WPA2.log, ssid > southcentral). Thanks for the logs. We found one bug in our code. We expect vendor specific IE at the beginning of IE buffer otherwise connection is rejected. We will prepare a fix and get back. Regards, Amitkumar ��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
