Hi Dave,
here's hopefully my last pull request for 4.4. ssb had a new Kconfig
entry and that's why this touches arch/mips/bcm47xx/Kconfig. ssb also
did some code shuffling and moved code from b43 to ssb subsystem.
Otherwise should be business as usual.
While writing this I noticed that Fengwei Yin had a problem with the
>From field and that's why you see "yfw" in the stats below. I considered
that this isn't a big enough problem to justify rebasing my tree, but
let me know if you think otherwise.
Please let me know if there are any problems.
Kalle
The following changes since commit 6d08f617872cc048173d59f1ce4660b030bab5a6:
net: hisilicon: updates HNS config and documents (2015-10-27 20:20:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git tags/wireless-drivers-next-for-davem-2015-10-29
for you to fetch changes up to 8aaa878de83a0de3833f5b00bc822dbcd403ec36:
Merge ath-next from ath.git (2015-10-29 15:34:27 +0200)
----------------------------------------------------------------
iwlwifi
* bug fix for TDLS
* fixes and cleanups in scan
* support of several scan plans
* improvements in FTM
* fixes in FW API
* improvements in the failure paths when the bus is dead
* other various small things here and there
ath10k
* add QCA9377 support
* fw_stats support for 10.4 firmware
ath6kl
* report antenna configuration to user space
* implement ethtool stats
ssb
* add Kconfig SSB_HOST_SOC for compiling SoC related code
* move functions specific to SoC hosted bus to separated file
* pick PCMCIA host code support from b43 driver
----------------------------------------------------------------
Alan Liu (1):
ath10k: add FW API support to test mode
Alexander Bondar (1):
iwlwifi: rs: Remove workaround that disables MIMO on P2P
Andrei Otcheretianski (1):
iwlwifi: mvm: Implement per vif frame registration API
Arik Nemtsov (2):
iwlwifi: mvm: correctly request DTS-measure for new cards
iwlwifi: mvm: disable TDLS ac queues correctly
Assaf Krauss (1):
iwlwifi: mvm: Allow setting ctrl-chnl-position in FTM responder
Avraham Stern (1):
iwlwifi: mvm: Add support for two scheduled scan plans
Bartosz Markowski (1):
ath10k: add QCA9377 chipset support
Ben Greear (5):
ath6kl: report antenna configuration
ath6kl: add error message to explain lack of HT
ath6kl: fix firmware version assignment
ath6kl: break stats gathering code into separate method
ath6kl: implement ethtool stats
Bob Copeland (1):
wcn36xx: introduce per-channel ring buffer locks
Eliad Peller (2):
iwlwifi: avoid read/write operations if the bus is dead
iwlwifi: mvm: take scan ref only on success
Emmanuel Grumbach (2):
Merge remote-tracking branch 'mac80211-next/master' into next
iwlwifi: pcie: fix (again) prepare card flow
Hamad Kadmany (1):
wil6210: Fix TSO overflow handling
Johannes Berg (4):
iwlwifi: mvm: use wowlan RX/TX timeouts in D0i3
iwlwifi: mvm: use short timeouts in P2P low latency if supported
iwlwifi: mvm: clean up some whitespace in scan code
iwlwifi: mvm: remove pointless scan plan checks
John Linville (1):
orinoco_usb: return error in ezusb_probe when alloc_orinocodev fails
Kalle Valo (2):
Merge tag 'iwlwifi-next-for-kalle-2015-10-25' of https://git.kernel.org/.../iwlwifi/iwlwifi-next
Merge ath-next from ath.git
Luca Coelho (1):
iwlwifi: mvm: let any command flag be passed to iwl_mvm_flushtx_path()
Maharaja (1):
ath10k: enable adaptive CCA
Manikanta Pubbisetty (1):
ath10k: add fw_stats support to 10.4 firmware
Marty Faltesek (1):
mwifiex: toggle carrier state in start_ap/stop_ap.
Matti Gottlieb (1):
iwlwifi: mvm: Dump FW's virtual image in the case of a NIC error
Moshe Harel (1):
iwlwifi: nvm: free old section data when reading nvm file
Ondrej Zary (2):
airo: Track APList_rid in struct airo_info
airo: fix scan after SIOCSIWAP (airo_set_wap)
Rafał Miłecki (3):
ssb: pick PCMCIA host code support from b43 driver
ssb: move functions specific to SoC hosted bus to separated file
ssb: add Kconfig entry for compiling SoC related code
Rajkumar Manoharan (8):
ath10k: use local memory instead of shadow descriptor in ce_send
ath10k: remove send completion validation in diag read/write
ath10k: cleanup copy engine send completion
ath10k: remove shadow copy of CE descriptors for source ring
ath10k: remove supported chain mask
ath10k: fill HT/VHT MCS rateset only for configured chainmask
ath10k: move static HT/VHT capability setup functions
ath10k: reload HT/VHT capabilities on antenna change
Vladimir Kondratiev (3):
wil6210: ignore selected WMI events
wil6210: fix device ready detection
wil6210: handle failure in Tx vring config
Zefir Kurtisi (1):
ath9k: fix phyerror codes
yfw (1):
wcn36xx: Remove warning message when dev is NULL for arm64 dma_alloc.
arch/mips/bcm47xx/Kconfig | 1 +
drivers/net/wireless/airo.c | 77 +++--
drivers/net/wireless/ath/ath10k/ce.c | 57 +---
drivers/net/wireless/ath/ath10k/ce.h | 16 +-
drivers/net/wireless/ath/ath10k/core.c | 21 +-
drivers/net/wireless/ath/ath10k/core.h | 22 +-
drivers/net/wireless/ath/ath10k/hw.h | 12 +
drivers/net/wireless/ath/ath10k/mac.c | 346 ++++++++++++----------
drivers/net/wireless/ath/ath10k/pci.c | 71 ++---
drivers/net/wireless/ath/ath10k/targaddrs.h | 3 +
drivers/net/wireless/ath/ath10k/testmode.c | 202 +++++++++++--
drivers/net/wireless/ath/ath10k/wmi-ops.h | 25 ++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 14 +
drivers/net/wireless/ath/ath10k/wmi.c | 248 +++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 148 +++++++++
drivers/net/wireless/ath/ath6kl/cfg80211.c | 143 +++++++++
drivers/net/wireless/ath/ath6kl/core.h | 2 +
drivers/net/wireless/ath/ath6kl/debug.c | 55 ++--
drivers/net/wireless/ath/ath6kl/debug.h | 2 +
drivers/net/wireless/ath/ath6kl/init.c | 2 +-
drivers/net/wireless/ath/ath9k/common-debug.c | 14 +-
drivers/net/wireless/ath/ath9k/mac.h | 18 +-
drivers/net/wireless/ath/wcn36xx/dxe.c | 61 ++--
drivers/net/wireless/ath/wcn36xx/dxe.h | 1 +
drivers/net/wireless/ath/wil6210/interrupt.c | 6 +-
drivers/net/wireless/ath/wil6210/main.c | 2 +-
drivers/net/wireless/ath/wil6210/txrx.c | 30 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 4 +-
drivers/net/wireless/ath/wil6210/wmi.c | 20 +-
drivers/net/wireless/b43/Kconfig | 20 --
drivers/net/wireless/b43/Makefile | 1 -
drivers/net/wireless/b43/main.c | 9 +-
drivers/net/wireless/b43/pcmcia.c | 145 ---------
drivers/net/wireless/b43/pcmcia.h | 20 --
drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h | 16 +
drivers/net/wireless/iwlwifi/iwl-fw-file.h | 4 +
drivers/net/wireless/iwlwifi/iwl-trans.h | 2 +
drivers/net/wireless/iwlwifi/mvm/constants.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 25 +-
drivers/net/wireless/iwlwifi/mvm/debugfs.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 5 +-
drivers/net/wireless/iwlwifi/mvm/fw-api.h | 63 ++++
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 3 +
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 67 ++++-
drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +-
drivers/net/wireless/iwlwifi/mvm/nvm.c | 1 +
drivers/net/wireless/iwlwifi/mvm/power.c | 41 ++-
drivers/net/wireless/iwlwifi/mvm/rs.c | 6 -
drivers/net/wireless/iwlwifi/mvm/scan.c | 120 ++++----
drivers/net/wireless/iwlwifi/mvm/sta.c | 9 +-
drivers/net/wireless/iwlwifi/mvm/time-event.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/tt.c | 11 +-
drivers/net/wireless/iwlwifi/mvm/tx.c | 4 +-
drivers/net/wireless/iwlwifi/pcie/trans.c | 10 +-
drivers/net/wireless/mwifiex/cfg80211.c | 8 +
drivers/net/wireless/mwifiex/uap_event.c | 7 -
drivers/net/wireless/orinoco/orinoco_usb.c | 1 +
drivers/ssb/Kconfig | 9 +
drivers/ssb/Makefile | 3 +-
drivers/ssb/bridge_pcmcia_80211.c | 128 ++++++++
drivers/ssb/host_soc.c | 173 +++++++++++
drivers/ssb/main.c | 172 +----------
drivers/ssb/ssb_private.h | 16 +
63 files changed, 1843 insertions(+), 889 deletions(-)
delete mode 100644 drivers/net/wireless/b43/pcmcia.c
delete mode 100644 drivers/net/wireless/b43/pcmcia.h
create mode 100644 drivers/ssb/bridge_pcmcia_80211.c
create mode 100644 drivers/ssb/host_soc.c
--
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
