From: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Currently the legacy methods suspend and resume are used for pcie
devices. This is not the preferable method and is also causing
issues with some setups when doing hibernate. Changing this to
use the new PM methods.
Reviewed-by: Arend Van Spriel <arend@xxxxxxxxxxxx>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Signed-off-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmfmac/pcie.c | 89 +++++++++++---------------
1 file changed, 37 insertions(+), 52 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
index 0edaaf5..e08bc64 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
@@ -1388,10 +1388,6 @@ static void brcmf_pcie_wowl_config(struct device *dev, bool enabled)
brcmf_dbg(PCIE, "Configuring WOWL, enabled=%d\n", enabled);
devinfo->wowl_enabled = enabled;
- if (enabled)
- device_set_wakeup_enable(&devinfo->pdev->dev, true);
- else
- device_set_wakeup_enable(&devinfo->pdev->dev, false);
}
@@ -1961,15 +1957,14 @@ brcmf_pcie_remove(struct pci_dev *pdev)
#ifdef CONFIG_PM
-static int brcmf_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
+static int brcmf_pcie_pm_enter_D3(struct device *dev)
{
struct brcmf_pciedev_info *devinfo;
struct brcmf_bus *bus;
- int err;
- brcmf_dbg(PCIE, "Enter, state=%d, pdev=%p\n", state.event, pdev);
+ brcmf_err("Enter\n");
- bus = dev_get_drvdata(&pdev->dev);
+ bus = dev_get_drvdata(dev);
devinfo = bus->bus_priv.pcie->devinfo;
brcmf_bus_change_state(bus, BRCMF_BUS_DOWN);
@@ -1984,62 +1979,45 @@ static int brcmf_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
brcmf_err("Timeout on response for entering D3 substate\n");
return -EIO;
}
- brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM_IN_USE);
- err = pci_save_state(pdev);
- if (err)
- brcmf_err("pci_save_state failed, err=%d\n", err);
- if ((err) || (!devinfo->wowl_enabled)) {
- brcmf_chip_detach(devinfo->ci);
- devinfo->ci = NULL;
- brcmf_pcie_remove(pdev);
- return 0;
- }
+ devinfo->state = BRCMFMAC_PCIE_STATE_DOWN;
- return pci_prepare_to_sleep(pdev);
+ return 0;
}
-static int brcmf_pcie_resume(struct pci_dev *pdev)
+
+static int brcmf_pcie_pm_leave_D3(struct device *dev)
{
struct brcmf_pciedev_info *devinfo;
struct brcmf_bus *bus;
+ struct pci_dev *pdev;
int err;
- bus = dev_get_drvdata(&pdev->dev);
- brcmf_dbg(PCIE, "Enter, pdev=%p, bus=%p\n", pdev, bus);
+ brcmf_err("Enter\n");
- err = pci_set_power_state(pdev, PCI_D0);
- if (err) {
- brcmf_err("pci_set_power_state failed, err=%d\n", err);
- goto cleanup;
- }
- pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D3hot, false);
- pci_enable_wake(pdev, PCI_D3cold, false);
+ bus = dev_get_drvdata(dev);
+ devinfo = bus->bus_priv.pcie->devinfo;
+ brcmf_dbg(PCIE, "Enter, dev=%p, bus=%p\n", dev, bus);
/* Check if device is still up and running, if so we are ready */
- if (bus) {
- devinfo = bus->bus_priv.pcie->devinfo;
- if (brcmf_pcie_read_reg32(devinfo,
- BRCMF_PCIE_PCIE2REG_INTMASK) != 0) {
- if (brcmf_pcie_send_mb_data(devinfo,
- BRCMF_H2D_HOST_D0_INFORM))
- goto cleanup;
- brcmf_dbg(PCIE, "Hot resume, continue....\n");
- brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
- brcmf_bus_change_state(bus, BRCMF_BUS_UP);
- brcmf_pcie_intr_enable(devinfo);
- return 0;
- }
+ if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0) {
+ brcmf_dbg(PCIE, "Try to wakeup device....\n");
+ if (brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM))
+ goto cleanup;
+ brcmf_dbg(PCIE, "Hot resume, continue....\n");
+ devinfo->state = BRCMFMAC_PCIE_STATE_UP;
+ brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+ brcmf_bus_change_state(bus, BRCMF_BUS_UP);
+ brcmf_pcie_intr_enable(devinfo);
+ return 0;
}
cleanup:
- if (bus) {
- devinfo = bus->bus_priv.pcie->devinfo;
- brcmf_chip_detach(devinfo->ci);
- devinfo->ci = NULL;
- brcmf_pcie_remove(pdev);
- }
+ brcmf_chip_detach(devinfo->ci);
+ devinfo->ci = NULL;
+ pdev = devinfo->pdev;
+ brcmf_pcie_remove(pdev);
+
err = brcmf_pcie_probe(pdev, NULL);
if (err)
brcmf_err("probe after resume failed, err=%d\n", err);
@@ -2048,6 +2026,14 @@ cleanup:
}
+static const struct dev_pm_ops brcmf_pciedrvr_pm = {
+ .suspend = brcmf_pcie_pm_enter_D3,
+ .resume = brcmf_pcie_pm_leave_D3,
+ .freeze = brcmf_pcie_pm_enter_D3,
+ .restore = brcmf_pcie_pm_leave_D3,
+};
+
+
#endif /* CONFIG_PM */
@@ -2086,9 +2072,8 @@ static struct pci_driver brcmf_pciedrvr = {
.probe = brcmf_pcie_probe,
.remove = brcmf_pcie_remove,
#ifdef CONFIG_PM
- .suspend = brcmf_pcie_suspend,
- .resume = brcmf_pcie_resume
-#endif /* CONFIG_PM */
+ .driver.pm = &brcmf_pciedrvr_pm,
+#endif
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
