> > Below patchset adds fast path support for uplink traffic by bypassing > > HTC layer processing. This is enabled by making use of unused copy > > engine 5 to receive HTT messages directly from HIF layer. From initial > > validation in VHT80/5G mode TCP UL is improved to 900Mbps from ~840Mbps > > in conducted test. > > > > -Rajkumar > > > > Rajkumar Manoharan (7): > > ath10k: export htc tx rx handlers > > ath10k: register per copy engine send completion callbacks > > ath10k: register per copy engine receive callbacks > > ath10k: export htt tx rx handlers > > ath10k: Configure copy engine 5 for HTT messages > > ath10k: remove unused dl_is_polled > > ath10k: remove htc polling for tx completion > > With these patches I'm seeing a DMA warning every time with qca988x > during firmware boot (tested three out of three times, rebooted after > every test): > > [ 60.458260] ------------[ cut here ]------------ > [ 60.458374] WARNING: CPU: 1 PID: 0 at lib/dma-debug.c:1090 check_unmap+0x815/0x940() > [ 60.458457] ath10k_pci 0000:02:00.0: DMA-API: device driver tries to free an invalid DMA memory address > [ 60.458557] Modules linked in: ath10k_pci ath10k_core ath mac80211 cfg80211 [last unloaded: cfg80211] > [ 60.458941] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.3.0-rc3-wl-ath+ #1082 > [ 60.458981] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 Thanks for reporting this issue. Will post revised patchset asap. -Rajkumar-- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
