Search Linux Wireless

Re: [PATCH v2] ath: use PRI value given by spec for fixed PRI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Peter Oh <poh@xxxxxxxxxxxxxxxx> writes:

> PRI value is used as divider when DFS detector analyzes candidate
> radar pulses.
> If PRI deviation is big from its origin PRI, DFS detector could miss
> valid radar reports since HW often misses detecting radar pulses and
> causes long interval value of pulses.
>
> For instance from practical results, if runtime PRI is calculated as
> 1431 for fixed PRI value of 1428 and delta timestamp logs 15719,
> the modular remainder will be 1409 and the delta between the remainder
> and runtime PRI is 22 that is bigger than PRI tolerance which is 16.
> As a result this radar report will be ignored even though it's valid.
>
> By using spec defined PRI for fixed PRI, we can correct this error.
>
> Signed-off-by: Peter Oh <poh@xxxxxxxxxxxxxxxx>

Thanks, applied.

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux