This patch replaces WILC_WFI_add_key with add_key to avoid CamelCase.
Signed-off-by: Chaehyun Lim <chaehyun.lim@xxxxxxxxx>
---
V3: remove "wilc_" prefix
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 88 +++++++++++------------
1 file changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 1ebaaef..b5e6176 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -1112,7 +1112,7 @@ static int disconnect(struct wiphy *wiphy, struct net_device *dev, u16 reason_co
}
/**
- * @brief WILC_WFI_add_key
+ * @brief add_key
* @details Add a key with the given parameters. @mac_addr will be %NULL
* when adding a group key.
* @param[in] key : key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key, 8-byte Rx Mic Key
@@ -1121,9 +1121,9 @@ static int disconnect(struct wiphy *wiphy, struct net_device *dev, u16 reason_co
* @date 01 MAR 2012
* @version 1.0
*/
-static int WILC_WFI_add_key(struct wiphy *wiphy, struct net_device *netdev, u8 key_index,
- bool pairwise,
- const u8 *mac_addr, struct key_params *params)
+static int add_key(struct wiphy *wiphy, struct net_device *netdev, u8 key_index,
+ bool pairwise,
+ const u8 *mac_addr, struct key_params *params)
{
s32 s32Error = WILC_SUCCESS, KeyLen = params->key_len;
@@ -2933,19 +2933,19 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev
PRINT_D(CFG80211_DBG, "gtk %x %x %x\n", g_key_gtk_params.key[0],
g_key_gtk_params.key[1],
g_key_gtk_params.key[2]);
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_ptk_key_params.key_idx,
- g_add_ptk_key_params.pairwise,
- g_add_ptk_key_params.mac_addr,
- (struct key_params *)(&g_key_ptk_params));
-
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_gtk_key_params.key_idx,
- g_add_gtk_key_params.pairwise,
- g_add_gtk_key_params.mac_addr,
- (struct key_params *)(&g_key_gtk_params));
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_ptk_key_params.key_idx,
+ g_add_ptk_key_params.pairwise,
+ g_add_ptk_key_params.mac_addr,
+ (struct key_params *)(&g_key_ptk_params));
+
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_gtk_key_params.key_idx,
+ g_add_gtk_key_params.pairwise,
+ g_add_gtk_key_params.mac_addr,
+ (struct key_params *)(&g_key_gtk_params));
}
/*BugID_4847: registered frames in firmware are now*/
@@ -3019,19 +3019,19 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev
PRINT_D(CFG80211_DBG, "gtk %x %x %x\n", g_key_gtk_params.key[0],
g_key_gtk_params.key[1],
g_key_gtk_params.key[2]);
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_ptk_key_params.key_idx,
- g_add_ptk_key_params.pairwise,
- g_add_ptk_key_params.mac_addr,
- (struct key_params *)(&g_key_ptk_params));
-
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_gtk_key_params.key_idx,
- g_add_gtk_key_params.pairwise,
- g_add_gtk_key_params.mac_addr,
- (struct key_params *)(&g_key_gtk_params));
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_ptk_key_params.key_idx,
+ g_add_ptk_key_params.pairwise,
+ g_add_ptk_key_params.mac_addr,
+ (struct key_params *)(&g_key_ptk_params));
+
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_gtk_key_params.key_idx,
+ g_add_gtk_key_params.pairwise,
+ g_add_gtk_key_params.mac_addr,
+ (struct key_params *)(&g_key_gtk_params));
}
/*Refresh scan, to refresh the scan results to the wpa_supplicant. Set MachHw to false to enable further key installments*/
@@ -3150,19 +3150,19 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev
g_key_gtk_params.key[2],
g_key_gtk_params.cipher);
#if 1
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_ptk_key_params.key_idx,
- g_add_ptk_key_params.pairwise,
- g_add_ptk_key_params.mac_addr,
- (struct key_params *)(&g_key_ptk_params));
-
- WILC_WFI_add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
- g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
- g_add_gtk_key_params.key_idx,
- g_add_gtk_key_params.pairwise,
- g_add_gtk_key_params.mac_addr,
- (struct key_params *)(&g_key_gtk_params));
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_ptk_key_params.key_idx,
+ g_add_ptk_key_params.pairwise,
+ g_add_ptk_key_params.mac_addr,
+ (struct key_params *)(&g_key_ptk_params));
+
+ add_key(g_linux_wlan->strInterfaceInfo[0].wilc_netdev->ieee80211_ptr->wiphy,
+ g_linux_wlan->strInterfaceInfo[0].wilc_netdev,
+ g_add_gtk_key_params.key_idx,
+ g_add_gtk_key_params.pairwise,
+ g_add_gtk_key_params.mac_addr,
+ (struct key_params *)(&g_key_gtk_params));
#endif
}
#endif
@@ -3562,7 +3562,7 @@ static struct cfg80211_ops WILC_WFI_cfg80211_ops = {
.scan = scan,
.connect = connect,
.disconnect = disconnect,
- .add_key = WILC_WFI_add_key,
+ .add_key = add_key,
.del_key = WILC_WFI_del_key,
.get_key = WILC_WFI_get_key,
.set_default_key = WILC_WFI_set_default_key,
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
