Please add the following device USB ID to the rt2800usb source.
Brand: Airlive (Ovislink Corp.)
Name: Turbo-G USB Adaptor
Model: WT-2000USB
USB ID: 1b75:3070
After reading specs on this device, I figured the rt2800usb driver would work for this wireless adaptor.
I first tested by using the new_id function as follows:
echo "1b75 3070"> /sys/bus/usb/drivers/rt2800usb/new_id
I then added the following line to rt2800usb.c line with the other Ovislink devices.
{ USB_DEVICE(0x1b75, 0x3070) },
I complied the modified rt2800usb driver, both methods were successful. I have been using the adapter for a week and seams to be working perfectly. I believe that all that needs to be done to support this device is to add it's USB ID. Below is my dmesg output from when I plugged the device in and also when i connected the device to a Wireless network.
[362529.196944] usb 1-1.4: new high-speed USB device number 10 using dwc_otg
[362529.364504] usb 1-1.4: New USB device found, idVendor=1b75, idProduct=3070
[362529.413100] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[362529.461461] usb 1-1.4: Product: 802.11 n WLAN
[362529.506599] usb 1-1.4: Manufacturer: Ralink
[362529.550372] usb 1-1.4: SerialNumber: 1.0
[362529.676928] usb 1-1.4: reset high-speed USB device number 10 using dwc_otg
[362529.837456] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[362529.893771] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[362529.926673] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[362531.322079] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[362531.364536] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[362531.457883] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29[362531.877956] IPv6:
[362532.039655] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
-
[363081.295356] wlan0: authenticate with XX:XX:XX:f4:31:57
[363081.438322] wlan0: send auth to XX:XX:XX:f4:31:57 (try 1/3)
[363081.478769] wlan0: authenticated
[363081.521074] wlan0: associate with XX:XX:XX:f4:31:57 (try 1/3)
[363081.564347] wlan0: RX AssocResp from XX:XX:XX:f4:31:57 (capab=0x411 status=0 aid=4)
[363081.611086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[363081.649247] wlan0: associated
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
