From: Haim Dreyfuss <haim.dreyfuss@xxxxxxxxx> During NIC initialization shared HW is reset and this disables the scheduler. Some HW platforms do not activate the scheduler after it. Consequently all HCMD sent by the driver stay at the queues which cause to queue stuck. Set the scheduler to work on auto active mode so it would be activated upon change over one of the queues' write pointer. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@xxxxxxxxx> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx> --- drivers/net/wireless/iwlwifi/iwl-prph.h | 1 + drivers/net/wireless/iwlwifi/pcie/tx.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 5af1c77..a846904 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -253,6 +253,7 @@ #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) #define SCD_GP_CTRL_ENABLE_31_QUEUES BIT(0) +#define SCD_GP_CTRL_AUTO_ACTIVE_MODE BIT(18) /* Context Data */ #define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 2b86c21..d711f0b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -915,6 +915,7 @@ int iwl_pcie_tx_init(struct iwl_trans *trans) } } + iwl_set_bits_prph(trans, SCD_GP_CTRL, SCD_GP_CTRL_AUTO_ACTIVE_MODE); if (trans->cfg->base_params->num_of_queues > 20) iwl_set_bits_prph(trans, SCD_GP_CTRL, SCD_GP_CTRL_ENABLE_31_QUEUES); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html