On 07/03/2015 10:34 AM, Richard Palethorpe wrote: > Hello Taehee, > > I have been experimenting with MESH mode on kernel 4.0.7. It is > sending beacons out, but is unable to establish a connection. > > I have two rtl8192cu based dongles connected to identical VMs and am > using the following commands to set up the mesh: > > iw dev wls160u2 set type mesh > ip addr add 192.168.2.1/24 broadcast 192.168.2.255 dev wls160u2 > ip link set wls160u2 up > iw dev wls160u2 mesh join lmmesh > > Running 'iw dev wls160u2 mpath dump' produces no results and there is > nothing regarding mesh in dmesg. I can't find any other information on > mesh with rtl8192cu other than the patch which you submitted. > > I am wondering if it does work, but there is a step I am missing or if > something is wrong with the code? I don't know about this 'mesh' mode, but I have noted problems in ad-hoc mode with this chipset and driver. The problem seems to be that ARP replies are not sent on the air... Not sure what the reason is or if it's possible to fix it in the driver, but my conclusion for now is that this device is unusable for ad-hoc mode. Similar problems may exist for mesh? bruno -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
