10.4 fw supports upto 16 interface in ap mode and 1 interface in station mode, overall total interfaces supported are 16 interfaces. Populate this limit in wiphy->iface_combinations. Signed-off-by: Raja Mani <rmani@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/mac.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index f9989d1..bbdf7a9 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6620,6 +6620,33 @@ static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = { }, }; +static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 16, + .types = BIT(NL80211_IFTYPE_AP) + }, +}; + +static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = { + { + .limits = ath10k_10_4_if_limits, + .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits), + .max_interfaces = 16, + .num_different_channels = 1, + .beacon_int_infra_match = true, +#ifdef CONFIG_ATH10K_DFS_CERTIFIED + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | + BIT(NL80211_CHAN_WIDTH_20) | + BIT(NL80211_CHAN_WIDTH_40) | + BIT(NL80211_CHAN_WIDTH_80), +#endif + }, +}; + static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) { struct ieee80211_sta_vht_cap vht_cap = {0}; @@ -6944,6 +6971,9 @@ int ath10k_mac_register(struct ath10k *ar) ARRAY_SIZE(ath10k_10x_if_comb); break; case ATH10K_FW_WMI_OP_VERSION_10_4: + ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb; + ar->hw->wiphy->n_iface_combinations = + ARRAY_SIZE(ath10k_10_4_if_comb); break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in