Search Linux Wireless

Re: [PATCH] mac80211: upgrade BW of TDLS peers when possible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2015-06-10 at 20:41 +0300, Emmanuel Grumbach wrote:
> From: Arik Nemtsov <arik@xxxxxxxxxx>
> 
> Define a station chandef, to be used for wider-bw TDLS peers. When both
> peers support the feature, upgrade the channel bandwidth to the maximum
> allowed by both peers and regulatory. Currently widths up to 80MHz are
> supported in the 5GHz band.
> 
> When a TDLS peer connects/disconnects recalculate the channel type of the
> current chanctx.
> Make the chanctx width calculation consider wider-bw TDLS peers and
> similarly fix the max_required_bw calculation for the chanctx min_def.
> Since the sta->bandwidth is calculated only later on, take
> bss_conf.chandef.width as the minimal width for station interface.
> 
> Set the upgraded channel width in the VHT-operation set during TDLS setup.

Applied.

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux