This patch does the following:
- Remove unnecessary flags field used by PERR element.
- Use the per target flags defined in ./include/linux/ieee80211.h.
- Process the target only subfield based on case E2 of sec 13.10.9.3
of IEEE 802.11-2012.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@xxxxxxxxx>
---
net/mac80211/mesh_hwmp.c | 32 ++++++++------------------------
1 file changed, 8 insertions(+), 24 deletions(-)
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 085edc1..5573e21 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -19,15 +19,6 @@
#define MAX_PREQ_QUEUE_LEN 64
-/* Destination only */
-#define MP_F_DO 0x1
-/* Reply and forward */
-#define MP_F_RF 0x2
-/* Unknown Sequence Number */
-#define MP_F_USN 0x01
-/* Reason code Present */
-#define MP_F_RCODE 0x02
-
static void mesh_queue_preq(struct mesh_path *, u8);
static inline u32 u32_field_get(const u8 *preq_elem, int offset, bool ae)
@@ -279,15 +270,10 @@ int mesh_path_error_tx(struct ieee80211_sub_if_data *sdata,
*pos++ = ttl;
/* number of destinations */
*pos++ = 1;
- /*
- * flags bit, bit 1 is unset if we know the sequence number and
- * bit 2 is set if we have a reason code
+ /* Flags field has AE bit only as defined in
+ * sec 8.4.2.117 IEEE802.11-2012
*/
*pos = 0;
- if (!target_sn)
- *pos |= MP_F_USN;
- if (target_rcode)
- *pos |= MP_F_RCODE;
pos++;
memcpy(pos, target, ETH_ALEN);
pos += ETH_ALEN;
@@ -570,15 +556,13 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
SN_LT(mpath->sn, target_sn)) {
mpath->sn = target_sn;
mpath->flags |= MESH_PATH_SN_VALID;
- } else if ((!(target_flags & MP_F_DO)) &&
+ } else if ((!(target_flags & IEEE80211_PREQ_TO_FLAG)) &&
(mpath->flags & MESH_PATH_ACTIVE)) {
reply = true;
target_metric = mpath->metric;
target_sn = mpath->sn;
- if (target_flags & MP_F_RF)
- target_flags |= MP_F_DO;
- else
- forward = false;
+ /* Case E2 of sec 13.10.9.3 IEEE 802.11-2012*/
+ target_flags |= IEEE80211_PREQ_TO_FLAG;
}
}
rcu_read_unlock();
@@ -974,7 +958,7 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_preq_queue *preq_node;
struct mesh_path *mpath;
- u8 ttl, target_flags;
+ u8 ttl, target_flags = 0;
const u8 *da;
u32 lifetime;
@@ -1033,9 +1017,9 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
}
if (preq_node->flags & PREQ_Q_F_REFRESH)
- target_flags = MP_F_DO;
+ target_flags |= IEEE80211_PREQ_TO_FLAG;
else
- target_flags = MP_F_RF;
+ target_flags &= ~IEEE80211_PREQ_TO_FLAG;
spin_unlock_bh(&mpath->state_lock);
da = (mpath->is_root) ? mpath->rann_snd_addr : broadcast_addr;
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
