As some radio have no connection with BT modules, enable the WLAN/Bluetooth
coexist(BTC) feature will has some side effect if the radio's GPIO connect
with any other HW modules. Add the control switcher "btc_feature" at
debugfs and set the feature as disable by default to avoid such case.
The FW support this feature since 10.2.4.54 on 2G-only board, dual band
or 5G boards don't support the feature
To enable this feature, execute:
echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btc_feature
To disable:
echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btc_feature
Signed-off-by: Yanbo Li <yanbol@xxxxxxxxxxxxxxxx>
---
Notes:
V3:
* using dev_flags
* check state on before restart
* Add the FW version and limitation support this feature
drivers/net/wireless/ath/ath10k/core.h | 2 +
drivers/net/wireless/ath/ath10k/debug.c | 65 +++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 3 +-
3 files changed, 69 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 87376b3283f5..7fc2034ce53d 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -481,6 +481,8 @@ enum ath10k_dev_flags {
* waiters should immediately cancel instead of waiting for a time out.
*/
ATH10K_FLAG_CRASH_FLUSH,
+ /* Flag for enable the BT/WLAN coexist */
+ ATH10K_FLAG_BTCOEX_ENABLE
};
enum ath10k_cal_mode {
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 8fa606a9c4dd..a5da7c96d81a 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2092,6 +2092,69 @@ static const struct file_operations fops_quiet_period = {
.open = simple_open
};
+static ssize_t ath10k_write_btc_feature(struct file *file,
+ const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char buf[32];
+ size_t buf_size;
+ bool val;
+ int ret;
+
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, ubuf, buf_size))
+ return -EFAULT;
+
+ buf[buf_size] = '\0';
+ if (strtobool(buf, &val) != 0) {
+ ath10k_warn(ar, "Wrong BTcoex feature setting\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (ar->state != ATH10K_STATE_ON) {
+ ret = -ENETDOWN;
+ goto err_unlock;
+ }
+
+ if (val != test_bit(ATH10K_FLAG_BTCOEX_ENABLE, &ar->dev_flags)) {
+ if (val)
+ set_bit(ATH10K_FLAG_BTCOEX_ENABLE, &ar->dev_flags);
+ else
+ clear_bit(ATH10K_FLAG_BTCOEX_ENABLE, &ar->dev_flags);
+ queue_work(ar->workqueue, &ar->restart_work);
+ }
+
+ ret = count;
+
+err_unlock:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static ssize_t ath10k_read_btc_feature(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[32];
+ struct ath10k *ar = file->private_data;
+ int len = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ len = scnprintf(buf, sizeof(buf) - len, "%d\n",
+ test_bit(ATH10K_FLAG_BTCOEX_ENABLE, &ar->dev_flags));
+ mutex_unlock(&ar->conf_mutex);
+
+ return simple_read_from_buffer(ubuf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_btc_feature = {
+ .read = ath10k_read_btc_feature,
+ .write = ath10k_write_btc_feature,
+ .open = simple_open
+};
+
int ath10k_debug_create(struct ath10k *ar)
{
ar->debug.fw_crash_data = vzalloc(sizeof(*ar->debug.fw_crash_data));
@@ -2195,6 +2258,8 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("quiet_period", S_IRUGO | S_IWUSR,
ar->debug.debugfs_phy, ar, &fops_quiet_period);
+ debugfs_create_file("btc_feature", S_IRUGO | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_btc_feature);
return 0;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 77220b0f0e89..98e0b087d080 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3936,7 +3936,8 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
cmd = (struct wmi_init_cmd_10_2 *)buf->data;
features = WMI_10_2_RX_BATCH_MODE;
- if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
+ if (test_bit(ATH10K_FLAG_BTCOEX_ENABLE, &ar->dev_flags) &&
+ test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
features |= WMI_10_2_COEX_GPIO;
cmd->resource_config.feature_mask = __cpu_to_le32(features);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
