Search Linux Wireless

[PATCH] mac80211: ignore invalid scan RSSI values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sara Sharon <sara.sharon@xxxxxxxxx>

Channels in 2.4GHz band overlap, this means that if we
send a probe request on channel 1 and then move to channel
2, we will hear the probe response on channel 2. In this
case, the RSSI will be lower than if we had heard it on
the channel on which it was sent (1 in this case).

The scan result ignores those invalid values and the
station last signal should not be updated as well.

In case the scan determines the signal to be invalid turn on
the flag so the station last signal will not be updated with
the value and thus user space probing for NL80211_STA_INFO_SIGNAL
and NL80211_STA_INFO_SIGNAL_AVG will not get this invalid RSSI
value.

Signed-off-by: Sara Sharon <sara.sharon@xxxxxxxxx>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
---
 net/mac80211/scan.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 7bb6a93..f995995 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -6,7 +6,7 @@
  * Copyright 2005, Devicescape Software, Inc.
  * Copyright 2006-2007	Jiri Benc <jbenc@xxxxxxx>
  * Copyright 2007, Michael Wu <flamingice@xxxxxxxxxxxx>
- * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright 2013-2015  Intel Mobile Communications GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -69,6 +69,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 	int clen, srlen;
 	enum nl80211_bss_scan_width scan_width;
 	s32 signal = 0;
+	bool signal_valid;
 
 	if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
 		signal = rx_status->signal * 100;
@@ -86,6 +87,11 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 					       GFP_ATOMIC);
 	if (!cbss)
 		return NULL;
+	/* In case the signal is invalid update the status */
+	signal_valid = abs(channel->center_freq - cbss->channel->center_freq)
+		<= local->hw.wiphy->max_adj_channel_rssi_comp;
+	if (!signal_valid)
+		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 
 	bss = (void *)cbss->priv;
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux