Search Linux Wireless

Re: ath5k phy0: noise floor calibration timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2008-04-18 at 17:51 +0300, Nick Kossifidis wrote:
> 2008/4/18, Dan Williams <dcbw@xxxxxxxxxx>:
> > On Fri, 2008-04-18 at 14:51 +0200, Pierre Frenkiel wrote:
> >  > hi,
> >  > I have a 3-com PCCARD, with the AR5413 chipset
> >  > I installed 2 days ago compat-wireless-2.6.tar.bz2, on Ubuntu Gutsy,
> >  > and everything seemed to work.
> >  > I just had in the log 2 or 3 messages:
> >  >
> >  >     ath5k phy0: noise floor calibration timeout
> >  >
> >  > but yesterday, when rebooting, I got a huge number of such messages(more
> >  > than 100 in the log file), with also
> >  >
> >  >     ath5k phy0: ath5k_chan_set: unable to reset channel
> >  >     ath0: failed to set freq to 2422 MHz for scan
> >  >     ath0: failed to restore operational channel after scan
> >
> >
> > I also get this all the time with a 5006E, and ath5k takes quite a lot
> >  (30%) of CPU most of the time.  Haven't tried to track it down yet.
> >  Anyone have ideas about the root cause of the problem?
> >
> >
> >  Dan
> >
> >  > and the boot froze. I then removed my PCCARD,
> >  > and after poweroff/poweron, I could boot normally.
> >  >
> >  > It seems to be fixed now, as I have no more this problem after
> >  > re-inserting the card.
> >  > But as I did nothing, I would like to know what might happen:
> >  > If this happened once, there is no reason why this would not happen an
> >  > other time.
> >  >
> >  > Pierre
> >  > --
> >  > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> >  > the body of a message to majordomo@xxxxxxxxxxxxxxx
> >  > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> >  --
> >  To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> >  the body of a message to majordomo@xxxxxxxxxxxxxxx
> >  More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> It seems that sometimes noise floor calibration takes longer than
> usual. I'll check it out and come up with a patch asap ;-)

Happy to test patches.  AR5413 802.11agb NIC (rev 01).  168c:001b,
subsys 10cf:1329.

Dan

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux