Search Linux Wireless

[PATCH v2 0/3] ath10k: improve power efficiency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some measurements for QCA61X4:

            Loaded    Started   Associated
Unpatched    31mA      88mA       43mA
Patched      14mA      15mA       23mA

Loaded = module loaded, driver bound, no interface
         is running

Started = Loaded, but one client interface is
          running, not associated

Associated = Started, but associated to an AP as
             client

Note: Unpatched was consuming more power when
Started than when Associated. This is no mistake.

I didn't have a way to measure QCA988X.


Janusz Dziedzic (2):
  ath10k: enable ASPM
  ath10k: fix idle power consumption

Michal Kazior (1):
  ath10k: enable pci soc powersaving

 drivers/net/wireless/ath/ath10k/debug.h |   1 +
 drivers/net/wireless/ath/ath10k/mac.c   |   9 +-
 drivers/net/wireless/ath/ath10k/pci.c   | 317 +++++++++++++++++++++++---------
 drivers/net/wireless/ath/ath10k/pci.h   |  97 +++++-----
 4 files changed, 284 insertions(+), 140 deletions(-)

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux