Search Linux Wireless

Re: lspci not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2015-05-17 14:57 GMT+02:00 Schmirr Wurst <schmirrwurst@xxxxxxxxx>:
> I'm not familiar with inline answers and mailing list, tried to put
> some order in my answer + log file
>
> 2015-05-17 13:18 GMT+02:00 Rafał Miłecki <zajec5@xxxxxxxxx>:
>> On 17 May 2015 at 12:23, Arend van Spriel <arend@xxxxxxxxxxxx> wrote:
>>> On 05/17/15 02:21, Schmirr Wurst wrote:
>>>> I tried as suggested to had a look at
>>>> /sys/bus/sdio/devices, but the only devices around there a 3
>>>> mmc1:0001:1 to :3, I guess it is something else...
>>>>
>>>> I already try to install brcmfmac_sdio , with some tutorial from the
>>>> internet, but it didn't work...
>>>> actually, I see under /sys/bus/sdio/drivers brcmfmac_sdio ...
>>>>
>>>> In that directory, I see a directory mmc1:0001:2
>>>> under device I have 0xa94d
>>>>
>>>> I completly lost, maybe you understand that information, sorry..
>>>
>>>
>>> I do. The fact that you see a subdirectory mmc1:0001:2 in
>>> /sys/bus/sdio/drivers/brcmfmac_sdio means that the driver was probed for
>>> this device. Now would be a good time to share your (friends') kernel log,
>>> but my guess is you are either missing firmware or nvram data or both for
>>> this device.
> I ve attatched the kernel.log here https://drive.google.com/file/d/0B8gm4mLCCQAgMmNlVVFSYmNjOGs/view?usp=sharing
> In dmsg I see following linked with the brc driver :
> dmesg | grep brc
> [    7.987661] brcmf_sdio_drivestrengthinit: No SDIO Drive strength
> init done for chip 43340 rev 2 pmurev 20
> [    7.993487] usbcore: registered new interface driver brcmfmac
> [    7.996318] brcmfmac_sdio mmc1:0001:1: Direct firmware load for
> brcm/brcmfmac43340-sdio.bin failed with error -2
> [    9.011572] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
> [   10.037365] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
>>
>> It could also mean driver was loaded manually. So please also make
>> sure the friend uses kernel 4.0 or newer.
> Kernel : 4.0.0 #3 SMP PREEMPT Wed Apr 22 17:52:53 MSK 2015
> Distro:
> Distributor ID:    T100 Ubuntu 15.04
> Description:    Ubuntu 15.04
> Release:    15.04
> Codename:    vivid
> I ve installed it from the magic stick here
> https://plus.google.com/communities/117853703024346186936
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux