Search Linux Wireless

[PATCH v3] ath10k: Bypass PLL setting on target init for QCA9888

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some of of qca988x solutions are having global reset issue
during target initialization. Bypassing PLL setting before
downloading firmware and letting the SoC run on REF_CLK is fixing
the problem. Corresponding firmware change is also needed to set
the clock source once the target is initialized. Since 10.2.4
firmware is having this ROM patch, applying skip_clock_init only
for 10.2.4 firmware versions.

Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index bcccae1..cb34619 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1084,6 +1084,16 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (status)
 		goto err;
 
+	if ((ar->hw_rev == ATH10K_HW_QCA988X) &&
+	    (ar->wmi.op_version == ATH10K_FW_WMI_OP_VERSION_10_2_4)) {
+		status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1);
+		if (status) {
+			ath10k_err(ar, "could not write skip_clock_init (%d)\n",
+				   status);
+			goto err;
+		}
+	}
+
 	status = ath10k_download_fw(ar, mode);
 	if (status)
 		goto err;
-- 
2.3.7

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux