Search Linux Wireless

Re: [PATCH v3] cfg80211: Allow GO concurrent relaxation after BSS disconnection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2015-04-27 at 16:52 +0300, Ilan Peer wrote:
> From: Avraham Stern <avraham.stern@xxxxxxxxx>
> 
> If a P2P GO was allowed on a channel because of the GO concurrent
> relaxation, i.e., another station interface was associated to an AP on
> the same channel or the same UNII band, and the station interface
> disconnected from the AP, allow the following use cases unless the
> channel is marked as indoor only and the device is not operating in an
> indoor environment:
> 
> 1. Allow the P2P GO to stay on its current channel. The rationale behind
>    this is that if the channel or UNII band were allowed by the AP they
>    could still be used to continue the P2P GO operation, and avoid connection
>    breakage.
> 2. Allow another P2P GO to start on the same channel or another channel
>    that is in the same UNII band as the previous instantiated P2P GO.

Applied.

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux