Hi Eliad, On Wed, Mar 25, 2015 at 2:45 PM, Eliad Peller <eliad@xxxxxxxxxx> wrote: > On Wed, Mar 25, 2015 at 3:24 PM, Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote: >> On 03/25/2015 01:58 PM, Eliad Peller wrote: >>> hi Marc, >>> >>> On Wed, Mar 25, 2015 at 2:27 PM, Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote: >>>> On 12/29/2014 07:24 AM, Eliad Peller wrote: >>>>> From: Kobi L <kobi.lev100@xxxxxxxxx> >>>>> >>>>> Enable ELP authorization in AP mode and enable the use >>>>> of the wakeup bit in the ELP register. >>>>> >>>>> Introduce AP role sleep configuration which is disabled >>>>> by default. When configured, it allows the AP to sleep >>>>> when ELP is authorized for it. >>>>> >>>>> Signed-off-by: Kobi Leibovitch <kobi.lev100@xxxxxxxxx> >>>>> Signed-off-by: Arik Nemtsov <arik@xxxxxxxxxx> >>>>> Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx> >>>> >>>> [...] >>>> >>>> >>>> This patch requires a new firmware, loading of "wl18xx-conf.bin" from >>>> [1] fails with: >>>> >>>>> wlcore: ERROR configuration binary file size is wrong, expected 1226 got 1221 >>>> >>> thanks. seems you're right. >>> >>> anyway, note that this file is not actual fw, but only the default >>> configuration params. >>> you can just delete it, and the driver will load just fine. >>> you can then recreate it with something like: >>> cat /sys/kernel/debug/ieee80211/phy0/wlcore/wl18xx/conf > >>> /lib/firmware/ti-connectivity/wl18xx-conf.bin >>> >>> actually, i don't think it makes much sense to have this file in the >>> linux-firmware git at all. >>> i'll try handling it. >> >> Thanks, there are more file with size of ~1k, are they optional, too? >> What's the "error" message if these optional files are not present? >> > AFAIK, the other nvs files are basically required for proper operation. > >> From working with $CUSTOMERS I gained the impression, messages like >> "error failed to load...." for optional file don't shine the best light >> on Linux, a neutral "using default values" is far better. > i agree :) Added Yaniv Machani in CC. Any update on the wl18xx-conf.bin issue? This file is still in linux-firmware repo. I have following problem. My Jorjin chip requires wl18xx-conf.bin compiled from special *.ini file. https://github.com/TI-OpenLink/18xx-ti-utils/tree/master/wlconf doesn't seem to support v4 firmware as it creates 1221 bytes conf file. Where can I get proper wlconf and companion files (dictionary.txt, struct.bin etc.)? Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
