This patch reworks the scanning code (ieee80211_rx_bss_info) to take
more parameters from beacons and keep a BSS info structure alive when
only beacons for it are received. This fixes a problem with iwlwifi
drivers (where we don't understand the root cause of the problem yet)
and another driver for some broken hardware (which cannot send probe
requests unless associated, so can't always actively scan.)
Signed-off-by: Bill Moss <bmoss@xxxxxxxxxxx>
[jmberg: reformatted comments, make probe_resp a bool]
Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
net/mac80211/ieee80211_i.h | 2 -
net/mac80211/mlme.c | 85 +++++++++++++++++++++++++++------------------
2 files changed, 52 insertions(+), 35 deletions(-)
--- everything.orig/net/mac80211/mlme.c 2008-04-16 16:53:38.000000000 +0200
+++ everything/net/mac80211/mlme.c 2008-04-16 17:42:05.000000000 +0200
@@ -2588,22 +2588,29 @@ static void ieee80211_rx_bss_info(struct
#endif
}
- bss->band = rx_status->band;
-
- if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
- bss->probe_resp && beacon) {
- /* STA mode:
- * Do not allow beacon to override data from Probe Response. */
- ieee80211_rx_bss_put(dev, bss);
- return;
- }
-
/* save the ERP value so that it is available at association time */
if (elems.erp_info && elems.erp_info_len >= 1) {
bss->erp_value = elems.erp_info[0];
bss->has_erp_value = 1;
}
+ if (elems.ht_cap_elem &&
+ (!bss->ht_ie || bss->ht_ie_len != elems.ht_cap_elem_len ||
+ memcmp(bss->ht_ie, elems.ht_cap_elem, elems.ht_cap_elem_len))) {
+ kfree(bss->ht_ie);
+ bss->ht_ie = kmalloc(elems.ht_cap_elem_len + 2, GFP_ATOMIC);
+ if (bss->ht_ie) {
+ memcpy(bss->ht_ie, elems.ht_cap_elem - 2,
+ elems.ht_cap_elem_len + 2);
+ bss->ht_ie_len = elems.ht_cap_elem_len + 2;
+ } else
+ bss->ht_ie_len = 0;
+ } else if (!elems.ht_cap_elem && bss->ht_ie) {
+ kfree(bss->ht_ie);
+ bss->ht_ie = NULL;
+ bss->ht_ie_len = 0;
+ }
+
bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int);
bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info);
@@ -2625,6 +2632,26 @@ static void ieee80211_rx_bss_info(struct
bss->supp_rates_len += clen;
}
+ bss->band = rx_status->band;
+
+ bss->timestamp = beacon_timestamp;
+ bss->last_update = jiffies;
+ bss->rssi = rx_status->ssi;
+ bss->signal = rx_status->signal;
+ bss->noise = rx_status->noise;
+ if (!beacon && !bss->probe_resp)
+ bss->probe_resp = true;
+
+ /*
+ * In STA mode, the remaining parameters should not be overridden
+ * by beacons because they're not necessarily accurate there.
+ */
+ if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
+ bss->probe_resp && beacon) {
+ ieee80211_rx_bss_put(dev, bss);
+ return;
+ }
+
if (elems.wpa &&
(!bss->wpa_ie || bss->wpa_ie_len != elems.wpa_len ||
memcmp(bss->wpa_ie, elems.wpa, elems.wpa_len))) {
@@ -2657,6 +2684,20 @@ static void ieee80211_rx_bss_info(struct
bss->rsn_ie_len = 0;
}
+ /*
+ * Cf.
+ * http://www.wipo.int/pctdb/en/wo.jsp?wo=2007047181&IA=WO2007047181&DISPLAY=DESC
+ *
+ * quoting:
+ *
+ * In particular, "Wi-Fi CERTIFIED for WMM - Support for Multimedia
+ * Applications with Quality of Service in Wi-Fi Networks," Wi- Fi
+ * Alliance (September 1, 2004) is incorporated by reference herein.
+ * The inclusion of the WMM Parameters in probe responses and
+ * association responses is mandatory for WMM enabled networks. The
+ * inclusion of the WMM Parameters in beacons, however, is optional.
+ */
+
if (elems.wmm_param &&
(!bss->wmm_ie || bss->wmm_ie_len != elems.wmm_param_len ||
memcmp(bss->wmm_ie, elems.wmm_param, elems.wmm_param_len))) {
@@ -2673,30 +2714,6 @@ static void ieee80211_rx_bss_info(struct
bss->wmm_ie = NULL;
bss->wmm_ie_len = 0;
}
- if (elems.ht_cap_elem &&
- (!bss->ht_ie || bss->ht_ie_len != elems.ht_cap_elem_len ||
- memcmp(bss->ht_ie, elems.ht_cap_elem, elems.ht_cap_elem_len))) {
- kfree(bss->ht_ie);
- bss->ht_ie = kmalloc(elems.ht_cap_elem_len + 2, GFP_ATOMIC);
- if (bss->ht_ie) {
- memcpy(bss->ht_ie, elems.ht_cap_elem - 2,
- elems.ht_cap_elem_len + 2);
- bss->ht_ie_len = elems.ht_cap_elem_len + 2;
- } else
- bss->ht_ie_len = 0;
- } else if (!elems.ht_cap_elem && bss->ht_ie) {
- kfree(bss->ht_ie);
- bss->ht_ie = NULL;
- bss->ht_ie_len = 0;
- }
-
- bss->timestamp = beacon_timestamp;
- bss->last_update = jiffies;
- bss->rssi = rx_status->ssi;
- bss->signal = rx_status->signal;
- bss->noise = rx_status->noise;
- if (!beacon)
- bss->probe_resp++;
/* check if we need to merge IBSS */
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && beacon &&
--- everything.orig/net/mac80211/ieee80211_i.h 2008-04-16 17:35:36.000000000 +0200
+++ everything/net/mac80211/ieee80211_i.h 2008-04-16 17:42:05.000000000 +0200
@@ -102,7 +102,7 @@ struct ieee80211_sta_bss {
u64 timestamp;
int beacon_int;
- int probe_resp;
+ bool probe_resp;
unsigned long last_update;
/* during assocation, we save an ERP value from a probe response so
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
