> Since usb bus add extra delay on each request, a command > with read + write requests is too expensive. We can dramtically > reduce usb load by moving this command to firmware. > > In my tests, this patch will reduce channel scan time > for about 5-10 seconds. > > Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx> Thanks, 18 patches applied to wireless-drivers-next.git: 8badb50cfab6 ath9k_htc: add new WMI_REG_RMW_CMDID command 8d1cbdef8a64 ath9k: ar9271_hw_pa_cal - use defs instead of magin numbers 0202a553f59b ath9k: ar9271_hw_pa_cal: use proper makroses. 93442c85d23a ath9k: ar9271_hw_pa_cal: use RMW buffer d55ce0a6f983 ath9k: add multi_read to be compatible with ath9k_htc a57cb45a0a05 ath9k: add new function ath9k_hw_read_array 03822782e829 ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY 9c05babd933e ath9k: use one shot read in ath9k_hw_update_mibstats 9830ba6c9ad0 ath9k: ath9k_hw_loadnf: use REG_RMW 3df5dd901d1a ath9k: write buffer related optimisation in ar5008_hw_set_channel_regs 10e03ef6b466 ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer 7b37e0d4db03 ath9k: use rmw buffer in ath9k_hw_set_operating_mode and ath9k_hw_reset 18d6616f1bb1 ath9k: ath9k_hw_4k_set_board_values: use rmw buffer 2028523b6dce ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW ad10e0d65030 ath9k: ath9k_hw_4k_set_board_values: use rmw buffer 2dfc0247f0ff ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_gain b1c1a26461a7 ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values eaa4059d56fd ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
