replace REG_WRITE to REG_RMW and place every thing in one
RMW buffer.
Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/eeprom_4k.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index 56621be..a631962 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -1039,17 +1039,17 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
}
REG_RMW_BUFFER_FLUSH(ah);
-
+ ENABLE_REG_RMW_BUFFER(ah);
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
pModal->switchSettling);
REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
pModal->adcDesiredSize);
- REG_WRITE(ah, AR_PHY_RF_CTL4,
- SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) |
- SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) |
- SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) |
- SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+ REG_RMW(ah, AR_PHY_RF_CTL4,
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) |
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) |
+ SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) |
+ SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON), 0);
REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
pModal->txEndToRxOn);
@@ -1078,6 +1078,8 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
pModal->swSettleHt40);
}
+ REG_RMW_BUFFER_FLUSH(ah);
+
bb_desired_scale = (pModal->bb_scale_smrt_antenna &
EEP_4K_BB_DESIRED_SCALE_MASK);
if ((pBase->txGainType == 0) && (bb_desired_scale != 0)) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
