New qca6174 with wmi-tlv firmware supports multi-channel operation. To make use of it ath10k needs a few changes: implement mac80211's chanctx API and rework tx queue control a bit. Changes since RFC: * I've sent `ath10k: defer AP self-peer removal wait` separately now because it's not really required for multi-channel per se v2: * fix null deref after rebasing * fix commit log typo v3: * remove some duplication wrt mac80211 [Johannes] * small fixes v4: * rebased * fix STA CSA * drop ar->arvifs data_lock protection patch * drop ar->arvifs for vif iteration in favour of ieee80211_iterate_active_interfaces() * small refactor in monitor recalc * add a patch to fix fw resource allocation for multi-vif/chan Michal Kazior (7): ath10k: allow empty ssid vdev config ath10k: implement chanctx API ath10k: implement adaptive qcs command ath10k: rework tx queue locking ath10k: implement tx pause wmi event ath10k: enable multi-channel on supported devices ath10k: allocate fw resources for iface combinations drivers/net/wireless/ath/ath10k/core.h | 18 + drivers/net/wireless/ath/ath10k/htt_rx.c | 102 +++- drivers/net/wireless/ath/ath10k/htt_tx.c | 4 +- drivers/net/wireless/ath/ath10k/hw.h | 6 +- drivers/net/wireless/ath/ath10k/mac.c | 940 ++++++++++++++++++++++++++---- drivers/net/wireless/ath/ath10k/mac.h | 24 + drivers/net/wireless/ath/ath10k/wmi-ops.h | 16 + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 88 ++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 46 ++ drivers/net/wireless/ath/ath10k/wmi.c | 18 +- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 11 files changed, 1125 insertions(+), 138 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
