Add support to configure quiet period (in milliseconds) via debugfs.
This is useful to experiment different quiet period values along with
different throttle ratio.
echo 100 > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/debug.c | 46 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/thermal.c | 4 +--
drivers/net/wireless/ath/ath10k/thermal.h | 1 +
3 files changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 301081d..812365c 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1991,6 +1991,49 @@ static const struct file_operations fops_pktlog_filter = {
.open = simple_open
};
+static ssize_t ath10k_write_quiet_period(struct file *file,
+ const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ u32 period;
+
+ if (kstrtouint_from_user(ubuf, count, 0, &period))
+ return -EINVAL;
+
+ if (period < ATH10K_QUIET_PERIOD_MIN) {
+ ath10k_warn(ar, "Quiet period %u can not be lesser than 25ms\n",
+ period);
+ return -EINVAL;
+ }
+ mutex_lock(&ar->conf_mutex);
+ ar->thermal.quiet_period = period;
+ mutex_unlock(&ar->conf_mutex);
+
+ return count;
+}
+
+static ssize_t ath10k_read_quiet_period(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[32];
+ struct ath10k *ar = file->private_data;
+ int len = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ len = scnprintf(buf, sizeof(buf) - len, "%d\n",
+ ar->thermal.quiet_period);
+ mutex_unlock(&ar->conf_mutex);
+
+ return simple_read_from_buffer(ubuf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_quiet_period = {
+ .read = ath10k_read_quiet_period,
+ .write = ath10k_write_quiet_period,
+ .open = simple_open
+};
+
int ath10k_debug_create(struct ath10k *ar)
{
ar->debug.fw_crash_data = vzalloc(sizeof(*ar->debug.fw_crash_data));
@@ -2088,6 +2131,9 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("pktlog_filter", S_IRUGO | S_IWUSR,
ar->debug.debugfs_phy, ar, &fops_pktlog_filter);
+ debugfs_create_file("quiet_period", S_IRUGO | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_quiet_period);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
index 747fea7..d3fd2ab 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -96,8 +96,7 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
ret = -ENETDOWN;
goto out;
}
- period = max(ATH10K_QUIET_PERIOD_MIN,
- (ATH10K_QUIET_PERIOD_DEFAULT / num_bss));
+ period = ar->thermal.quiet_period;
duration = (period * duty_cycle) / 100;
enabled = duration ? 1 : 0;
@@ -207,6 +206,7 @@ int ath10k_thermal_register(struct ath10k *ar)
}
ar->thermal.cdev = cdev;
+ ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT;
/* Do not register hwmon device when temperature reading is not
* supported by firmware
diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h
index 5e87d9a..050f41d 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.h
+++ b/drivers/net/wireless/ath/ath10k/thermal.h
@@ -29,6 +29,7 @@ struct ath10k_thermal {
/* protected by conf_mutex */
u32 duty_cycle;
+ u32 quiet_period;
/* temperature value in Celcius degree
* protected by data_lock
*/
--
2.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
