On 03/12/15 18:04, German wrote:
On Thu, 12 Mar 2015 12:09:02 +0100
Arend van Spriel<arend@xxxxxxxxxxxx> wrote:
On 03/12/15 09:50, German wrote:
On Thu, 12 Mar 2015 09:28:38 +0100
Arend van Spriel<arend@xxxxxxxxxxxx> wrote:
On 03/11/15 23:21, German wrote:
On Wed, 11 Mar 2015 22:17:38 +0100
Arend van Spriel<arend@xxxxxxxxxxxx> wrote:
On 03/11/15 22:00, German wrote:
On Wed, 11 Mar 2015 21:44:44 +0100
Arend van Spriel<arend@xxxxxxxxxxxx> wrote:
On 03/11/15 21:33, German wrote:
On Wed, 11 Mar 2015 21:25:26 +0100
Arend van Spriel<arend@xxxxxxxxxxxx> wrote:
On 03/11/15 21:17, German wrote:
Hi. When I try to run aformentioned command it hangs for about 20 secs and no output is returned. What's the problem might be? Thanks
any more details you can share? What kernel version, what specific
device is wlp1s0, do you have any kernel logging.
When I wrote down the questions I was wondering how specifc I should be.
Kernel 3.18.7-gentoo.
ok
wlp1s0 is my network card.
Sure. I meant what brand and model.
Can you run following commands:
$ lspci
$ lsusb
realtek RTL8723BE PCIe Wireless Network Adapter
As for kernel logging, I simply don't know if I have it. Thanks
Ok. Can you run following command after aborting the hanging iw scan
command:
$ dmesg
Polling FW ready fail! Firmware is not ready to run.
Ok, so I need some sort of firmware? That's what I thought. What is this and where can I find it in kernel when I compile it? Thanks
Not familiar with Realtek equipment but it might be provided by the
linux-firmware package so:
$ sudo emerge --ask linux-firmware
Thanks Arend. This did the trick. I can now scan networks and I found mine. But how I actually connect to my network? I guess it is encrypted, but I have wpa_supplicant installed.
Gentoo does not seem to provide NetworkManager as a solution. I found
this page [1]. Maybe it helps.
Thanks Arend for pointing me to this link. NetworkManager was proposed to me on gentoo mailing list as a way to control both wireless and wired interfaces. It pulled a bunch of dependencies, though I used -X flag in USE variable not to use X server. the compile took about an hour and after all this, my system became unstable. It doesn't at all feels right, it is clunky. For now I am building gentoo laptop in pure console mode, so from all my research, iw is the only CLI tool for wireless and I like the fact it doesn't need bunch of dependences. I already installed it and I like it, so would you be so kind to get me through a set up? Documentation seems confusing. Thanks
Well. iw is really for testing/debugging. Especially with WPA/RSN
networks that do periodic rekeying you need wpa_supplicant. It will do
the scanning on its own and establish connection and such.
You could also opt for using nmcli, but that might be what you tried
already.
I am no gentoo expert, but let's try to get this working. I am following
the wpa_supplicant section of the link I send earlier.
Are you advising not to use iw and go the wireless-tools package?
Nope. Those are only useful for unprotected networks or WEP (which is
almost same as unprotected). The two options are wireless-tools or
wpa_supplicant. See below.
1. modify /etc/conf.d/net
Not sure if you only use wireless on the machine. Otherwise, you can
copy the attach conf.net file:
$ sudo cp conf.net /etc/conf.d/net
2. install wpa_supplicant configuration
Edit attached wpa_supplicant.conf with your ssid and psk and copy it:
$ sudo cp wpa_supplicant.conf /etc/wpa_supplicant
3. restart networking
$ sudo /etc/init.d/net restart
Not sure if step 3. is entirely correct regarding the script name. I
don't use Gentoo.
Regards,
Arend
Regards,
Arend
[1]
http://wiki.gentoo.org/wiki/Handbook:Parts/Networking/Wireless#Wireless_tools
Regards,
Arend
Regards,
Arend
Regards,
Arend
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
