Search Linux Wireless

Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 09 March 2015 17:36:42 Eliad Peller wrote:
> --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
> +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
> @@ -64,4 +64,13 @@
>         vmmc-supply = <&lbep5clwmc_wlen>;
>         bus-width = <4>;
>         non-removable;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       wlcore: wlcore@2 {
> +               compatible = "ti,wl1835";
> +               reg = <2>;
> +               interrupt-parent = <&gpio5>;
> +               interrupts = <8 IRQ_TYPE_NONE>;
> +       };
> 

Why IRQ_TYPE_NONE?

I was expecting you to remove all calls to legacy_init_wl12xx from this file,
including the ones for wl12xx aside from the wl18xx ones you removed, but
if that's enough to clean out the platform_data handling from the wlcore
driver, it's good enough as a start.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux